Increase profit by using different process of molding

Posted by Anu Singh on November 22nd, 2014

Molds are matrixes which are used for shaping a molten or plastic substance. In molds different type of molding process are used to manufacture the different types of plastic products.  Mold of raw material which is melted and formed into continuous profile, various plastic extrusion part are made such as pipe/tubing, weather stripping, fencing, deck railing, window frames, plastic films and sheeting, thermoplastic coatings and wire insulation which are used by different company for their purpose .These parts are extracted from the process of plastic extrusion which extensively used to reprocess recycled plastic waste or other raw materials after cleaning, sorting and blending.

In Mold decoration is one of the special feature which is used during the process of molding in which decorating the plastic surfaces with color and with an abrasion resistant coat. In this process a carrier foil is placed inside the opened mould. It carries the dried paint layers which are to be transferred to the plastic part, with the paint facing the gate. The paint adheres to the plastic, after filling with plastic and is removed from the carrier when opening the mould.

For manufacturing the different types of plastic products insert molding is one of the processes in which metal stampings, bushings, electromechanical parts, filtration materials and other discrete parts are combined into a single component through the injection of thermoplastic around the carefully placed parts. It involves various step and highly efficient alternative to the assembly of discrete parts using soldering, connectors, fasteners or adhesives. Its also befits over different methods such as   reduced assembly and labor costs, reduced size and weight. It also helps in increasing the reliability and design flexibility.

 At last but not lest Plastic Injection Molding process which are different from other process because in this process is not a new concept .this process has increased the business quality of many plastic industry, therefore this process is best molding method. In this process two materials are involved, thermoplastic and thermosetting plastic. Appling this process in plastic industry, they manufacture a wide rage of plastic products like bottle caps, containers, plastic combs, home appliances and many other plastic products which we generally use in home. Only from this process many plastic industry produceing many idle products in large volume. In this process material used in wide range, the cost of labor is low, scrap losses are minimized and high tolerances are repeatable.

Like it? Share it!

Anu Singh

About the Author

Anu Singh
Joined: October 28th, 2014
Articles Posted: 12

More by this author