Infrared Heaters: Tips for Troubleshooting

Posted by dawson12 on December 17th, 2014

As you know, an infrared heater heats the objects, not the atmosphere. The unit makes use of infrared rays which get absorbed by anything which comes in its path. You cannot see this light because it is beyond the spectrum of what man can see. This is the safest among the heaters you can buy in the market at present. However, it is not ideal for warming up an entire home. Infrared units are generally used to heat up large open spaces like warehouses. They help compensate the loss of heat from the large openings in these areas.

Getting the most from infrared heaters

It is true that infrared heater is the most energy efficient heating unit available at present. But, getting the most from these units requires a bit of care. Do the following to make sure that the heat is evenly distributed.

1. Let the back of the heater face your outer wall and the front the inner wall.
2. Take care to ensure that at least 30% humidity is there in the atmosphere. You can make use of a hygrometer to measure it.
3. Clean the filters at regular intervals; at least once in two months. This would ensure free flow of air. It also helps the heat to get distributed evenly.
4. The heater you purchase may have been stored in a cold place for quite a long time. Allow it to warm up in your room before switching it on.
5. Concrete absorbs heat. When placing your infrared heater, make sure that it is at least three feet above the concrete floor in your home.

Troubleshooting tips

Here is a brief overview of the general problems you may face when operating an infrared heating unit and their solutions.

1. 1.       Building up of sediments

This is the trouble you are going to encounter if you go for inferior models.  The high-end units feature easily detachable covers to remove the sediments. In some others, you may have to use a screwdriver for the purpose.  Whatever is the situation, you have to clean the filters. Negligence here may prove fatal. It would not only affect its efficiency, but also poses the risk of fire hazards.

1. 2.       Be willing to spend some time

If you notice signs of damage to your heating unit, do not immediately take it to the service center. A bit of self-repairing may be able to sort out the issue.

When you find that your heater is not working properly, begin with checking the power supply. Make sure that it is plugged on and the switched is turned on. If the unit fails to start up, check if the cords are damaged or broken. If this is not the issue, you may have to check the fuel supply. Check to see that the tank is filled and it has enough fuel for the unit to function. However, do not meddle with the cylinder. Just open the valve and see if you can light up the supply.

If all these attempts fail, take it to a service center. Remember, if properly maintained, infrared heaters allow you to warm up healthy and clean.

Get infrared heater at Heater Store TODAY – just visit this link http://www.heater-store.com/ and enjoy pleasant heat at your home.