Simple steps to repair your TPE sex doll

Posted by fujida on February 19th, 2021

If this is your first time repairing a doll with a heat gun, then the best way is to buy a test TPE material and operate on it. TPE materials can be obtained from TPE suppliers. Practice the heat gun method until you are familiar with how to perform the process correctly.

The melting point of the skin of the TPE doll is about 110 degrees Celsius. At this point, you can see that the heated area has a glaze-like mirror coating. Observe the intensity of the smoke, it will tell you when to stop blowing heat.

When you reach the correct position, take a cloth to wipe the scratches on the doll's skin. Repeat the heating and cooling process until the skin of the sex doll is properly smooth.

https://mailovedoll.jp/product/yunna-lovedoll/

Method #4. Seal tears with TPE glue

Before applying the glue to the broken skin of the sex doll, it is best to wash it with soap, makeup remover or nail polish remover. Then make sure that the damaged skin is completely dry.

Also, make sure that the doll is placed correctly. The torn area should be placed horizontally to prevent the adhesive from overflowing. Once the doll is in the correct position, use a fine-tipped applicator to apply TPE glue. This process requires a small amount of accuracy to get the best results.

In addition, please prepare a clean cloth before applying glue to the doll. After applying the TPE adhesive, glue the torn parts together, and then squeeze out the excess adhesive. Wipe with a clean cloth to make the repair area as smooth as possible.

https://mailovedoll.jp/product/elle-lovedoll/

When using TPE glue to repair sex dolls, another point to remember is to avoid rubbing off excess glue with your fingers. TPE adhesive will harden quickly, will produce unwanted marks when touched with your fingers, and will damage the smoothness of the doll's skin.

In addition, you can use the face of a restorative doll