Advice on the maintenance of sprinkler Timers

Posted by tedmark on February 10th, 2015

To use a modern sprinkler Timers implies not only to install the irrigation system with maximum of attention but also to learn more on after sales servicing and maintenance. In other words, for a Hunter or a Timers sprinkler, you must check the water pressure, look for leaking pipes and verify the pump or the motor on a periodic basis. So, don’t neglect even the smallest malfunctioning and call an authorized technician to provide you a solution!   

If you have just installed a new sprinkler Timers or a Hunter model, then you must know that the work is not finished. On the contrary, if you want the system to be functional for years to come, it is recommended to follow some important tips on maintenance and servicing. Let’s see what you should do for the system to be 100% functional at all times!

Repair the pumps and the motor! Regardless of whether you went for a Hunter sprinkler or you have already installed the sprinkler Timers, it is important not to ignore any small problem of the pump or the motor. Actually, the moment you hear a strange noise or you notice smoke, it is mandatory to contact an authorized technician. It’s simple: if the heart of the system is not working, then the entire system will inevitably collapse!

Check for leaking pipes! When it comes to underground systems such as the sprinkler Timers one of the biggest challenges is to spot any problems with the pipes. However, a leaking pipe can be detected by using the proper equipment. This means that a professional team of technicians will be able to control the underground pipes and to understand whether there is a problem or not.

Verify water pressure! One of the most important aspects of any sprinkler system, including the sprinkler Timers or the Hunter models, is the pressure of the water. Actually, this is one of the criteria according to which the mapping of the watering zones is done. That is why you should make sure that there is a constant pressure and that it hasn’t lowered since the installation. Otherwise, major damages can occur.

Upgrade the system any time needed! The good news about these systems is that there is always an improvement to learn about. And important manufacturer such as Hunter or Timers cannot make an exception from this rule. So, if you have installed a sprinkler from one brand or another then you must keep in touch with the technicians and upgrade also your model.

In the end, there is no secret: it’s only a matter of paying attention and contracting an authorized company to manage all the controls and the repairs. And if you don’t forget that to prevent is always better than to repair then you will save precious time and money in the future! 

For more information on Hunter and Timers sprinklers, please access the webpage Hunter. Take a moment and check out the site sprinkler Timers for further details on the company, the services provided, the areas covered, the list of prices or for requesting a personalized offer.