Daily operation and maintenance of bus processing machine

Posted by bruce zhu on February 24th, 2021

Few people know about the bus bar machine industry. It is a kind of equipment used in the power industry. In daily life, the distribution cabinets used in large factories and enterprises are processed and produced by busbar bending machine. Today, I will mainly talk about the daily maintenance of bus bar machine, Bus processing machine needs regular maintenance just like a car. Only in this way can we ensure that the machine has a good working condition for a long time and create more value for the manufacturer.

About the maintenance of the bus machine, the first problem is the hydraulic oil. The bus processing machine uses No. 46 anti-wear hydraulic oil. The high-quality hydraulic oil is particularly important for the machine. The low-quality hydraulic oil will damage the busbar bender, block the filter element, and affect the various functions of the bus machine. Therefore, it is necessary to choose high-quality hydraulic oil. As for the replacement cycle of hydraulic oil, if the bus bar machine is used every day and the workload is particularly heavy, I suggest to replace it once a year. If the bus bar machine is not commonly used, I suggest to replace the hydraulic oil once every two years, and 80 kg of hydraulic oil is enough each time.

Because the bus machine is an electrical equipment, so the safety is very important. Every time the copper cutting, the power must be turned off to keep the workshop dry and ventilated. The staff should not wear long sleeve jacket. If the workers have long hair, they must coil it up to avoid the clothing and hair squeezing into the machine during the operation, causing harm to the workers. Every time before starting the machine, you should tidy up the wires and put them in the right place to avoid electric shock.