Best Procedure To Install Your Wall Tiles

Posted by articlelink01 on March 11th, 2015

Do you know how to install cork flooring tiles? You might have given it a try once and now you are planning to tile your walls. The two procedures are not all the same but are motivated; if you have attempted to install floor tiles, then you should have fun working on your walls. Although the entire procedure may not be similar for both processes, there are certain procedures that resemble in both applications. Nonetheless, note that wall tiles vary with respect to the room and the material used!

Procedure for installing your wall tiles

Cork has since history been applauded for its versatile and long-lasting finishing properties. It is suitable for your floor as well as wall. Even so, let us not divert our focus from wall tiles. This material is most suitable in the bathrooms and kitchens because of its ability resist pressure, water and moisture.

Like any other task, you must prepare your walls and tiles. Ensure your wall is strong enough for the procedure. If there are cracks on the surface, replace the wall rather than taking the risk of the wall breaking and falling down after tiling it. Press on your wall to find out if it needs to be renovated as the case when it feels soft or it paves way for you!

To prepare your tiles, you must cut them into shape considering their appearance on the edges and corners of your wall. Most of these places will only use a section of a tile rather than the entire piece. Then, install a batten when you want to start installing your wall tiles. It will help you to identify a straight row for the start of the work. After installing the tiles, you can eliminate the batten by unscrewing it.

When laying down the tiles, first mix the mortar as directed by your tiles’ manufacturer until the paste resembles peanut butter. Let the mixture rest for approximately 15 minutes then apply it on the surface to tile. Finally, you can fix your wall tiles. Concentrate on the limited space that you purposed to work on for the day.

Tricks to make your work easier

-          When you want to install cork flooring tiles on a large surface, use your tiling board as your backer. Install it to get the impression of a dry wall because in reality, it is found from water-resistant equipment.

 Use tape measure to locate the horizontal and vertical centers of the region you wish to tile. Remember, the middle point is a place that you can always refer to when you start to tile. Then, use a chalk line to mark the relevant locations on the wall.

A diamond wet saw is the ideal instrument to cut your wall tiles into desirable sizes.

Mortar rising between the tiles is an indication to use a slightly smaller trowel.

Always check at the levels of the tiles to ensure they are uniform using a laser level.

You might want to find more information related to installing wall tiles as well as cork flooring tiles. Take your time to identify trustworthy contractors or seek the assistance of cork experts online such as icork. Take advantage of wall tiles websites that have all the information that you need to find out.