Here is a guide on how to fix the Canon printer error e100-0001 that Canon black and white laser printers encounter. When this is the case, usually the machine will stop the print job and give a warning light. And to fix it, we must understand the meaning of the Canon error e100 0001.
Steps To Resolve Canon Printer Error Code e100-0001
According to the manufacturer's original text: "When the heater is on, the heater drive current level is below a specific value for as long as 5 waves of the zero-cross signal. Cause The fixing film unit is faulty. PCB is faulty ". Infusion is: when the machine is running the temperature of the drying is lower than the specified level, there are two reasons:
- Defective thermal part: broken or the heat detector (sensor) is not working correctly
- Faulty DC controller board PCB could be the condenser
Thus, the error e100 0001 is the error convention related to the drying part specified by the Canon manufacturer.
Canon Printer e100 0001 Error handling direction
There is not even a single form of technical hiccup which can’t be resolved by the professionals of Canon Printer. If the occurrence of error like - e100 0001 is highlighted then following the points mentioned below: -
1. The user needs to replace the Laser Scanner Unit.
2. In the next step, the user can replace the engine Controller Board.
Under no circumstances the users of Canon Printer will be subject to imperfections or hurdles. This is because multiple forms of quality checks are carried out before the printer is rolled out in the market.
