A Must Read Guide to Cork Tiles InstallationPosted by articlelink01 on April 4th, 2015 Cork floors have actually become common nowadays. This is because of the many advantages which accompany them. They are durable and sound proof among other benefits which come with cork floors. If you have found out that cork floor is the perfect floor for your home. To install cork flooring tiles is not a hard work. This is because you can even do this work by yourself as long as you follow some simple steps. The third step when you want to install cork flooring tiles is for you to start laying the cork floors. With cork tiles, you can always use the standard tile type of laying pattern. The only trick with the cork tile installation is actually using right the amount of adhesive and following the instructions on how to use it. This is because different adhesive require different minutes to settle before you can start installing. Also cork floors manufacturers may specify for you to use some particular adhesives. The other step is for you to use a drum roller and then go over the freshly laid floor from various directions. After this step you will need a maximum of 48 hours before you can lay in your furniture on the cork floor tiles. The fifth step usually depend on your as the cork tile installer and the manufacturer. It’s always a good idea if you can put a sealant coat. This can be good in prolonging your cork tile life. But if you can properly maintain it and where the tile is there is no much traffic it can actually go without this coat and last for long. These are some of the steps which you can always use to install cork flooring tiles in your homes.
Like it? Share it!More by this author |