A Concise Overview of Standard and Custom Switchboards

Posted by tricolite on March 15th, 2021

A switchboard refers to a large number of things with applications in a wide range of industries. Electrical switchboards made and supplied by the standard and custom switchboards manufacturers are majorly involved in:

• Mixing consoles 
• Printed circuit boards, and
• Electric panels for a large number of other applications.

What is an electrical switchboard? 

 An electric switchboard is a panel that is used to distribute power safely throughout commercial as well as residential facilities. This device divides an electrical power feed into various sub-branch circuits while providing the system with a protective fuse for all circuits in a confined enclosure. 

 Electrical switchboards made and supplied by the leading standard and T-safe switchboard suppliers generally come with a maximum voltage rating of 600 VAC/VDC and a maximum bus rating of 6000.

The concept of customized switchboards 

Be it electrical or any other industrial domain, not all jobs, and tasks are created equal. At various times you need a remedy that is a little bit different from the solutions in general. Under such a situation, the customized switchboards made and supplied by the leading custom switchboards manufacturers in India are the devices that work exactly according to your specific needs. While most types of electrical switchboards come with 3 phase functionality, a custom switchboard can be created according to what you want.  

The difference between a switchboard and a panel board 

In a typical power distribution system, both switchboards and panelboards offer the same kind of functionalities. Provided by the leading panel boards manufacturers in India, panel boards are often limited to a max of 1200 A main incoming current with their installation in a wall. On the other hand, switchboards made and supplied by the leading standard and T-safe switchboard suppliers generally are freestanding units to be front connected needing only the front access, just similar to panel boards.

However, if required, switchboards allow for both rear and front access. Additionally, they can contain bussing and overcurrent apparatuses up to 6000 A. Pane boards, on the other hand, are created to UL 67 as opposed to switchboards that are typically governed by UL 891.  

The structure of switchboards

 A switchboard can comprise a solitary vertical design or different constructions relying upon the number and sizes of the heaps being fueled. A primary design contains the fundamental disengages or principle hauls and contains utility or potential client-specific hardware and security features. Cabling can enter straightforwardly into the fundamental construction or through a committed force structure. Pull structures are normally utilized in assistance with entrance switchboards. Cables can enter the construction from the floor (base passage) or from above (top section.) 

Concluding Remarks

Tricolite is one of the leading custom switchboards manufacturers and suppliers in India. The company has been designing, manufacturing, supplying, testing, and commissioning custom-built medium and low voltage electrical switchboards and Turnkey solutions for 33KV/11KV/415V for the past 60 years. Right from the very beginning, the company has focused on innovation and all the switchboards manufactured by the company are tested and certified to work in Seismic Zone IV conditions.