Their energy-saving and high-efficiency have been imitated

Posted by highbaylight on March 18th, 2021

The brightness of the LED street lamp itself is ten times that of the traditional lamp. If such a problem Wholesale Die Casting Led Street Light Housing factory occurs, replace the battery with a new one in time. Then check the battery board to see if it has sufficient voltage. If there is no voltage, replace the battery board in time. The whole light is off For this kind of situation, first check whether there is water leakage or electric leakage.

At this time, you should replace the non-lighting LED lights or turn them off. You can’t comment on the possible problems based on the brightness of the street lamp. In short, we must have a comprehensive consideration for the problems of solar street lights, and check step by step. In fact, a street lamp with high brightness is not necessarily a good product.jschindo. There is a problem with the line After a long period of use, there may be problems with poor line contact, especially the battery may be fed, resulting in a decrease in stored electrical energy, and as a result, the LED lights will flicker continuously.With the rapid development of today’s society, low-carbon new energy sources have gradually integrated into us.

It may be that there is a problem with the controller. If possible, test the voltage. If the voltage is lower than 10. If the brightness is too high, energy is wasted and it is easy to cause glare from street lights. There is a problem with the battery When the LED lights are dim when they turn on and are not as good as before, check the battery to see if its energy storage has dropped. In order to save energy, many solar street lights have been installed from cities to rural areas. If the sunlight is insufficient, the solar panels can not supply the battery normally. is a manufacturer specializing in the production of solar street lights, high pole lights, garden lights, landscape lights, led street lights, more than 15 years of production experience, high quality, low prices, and integrity We welcome new and old customers to come to consult.

For the problems found, the repairs should be repaired, and the key components should be replaced, so as to ensure the brightness of the street lights. Jiangsu Qiandu Lighting . Check the LED light source Solar street lights generally use LED lights, but if the street lights do not light up, in addition to the quality of the bulb, it is more likely to be a problem with the connection and welding of the lamp socket.

Their energy-saving and high-efficiency have been imitated in many places, but sometimes Because of frequent failures of one kind or another, the Yangzhou solar street lamp manufacturer will analyze the brightness failure of solar street lamps today.8V, it is not a problem of battery leakage or power feeding. Check if the light is on, and overhaul any problems found. Is the selection of the installation site reasonable? For street lights that are not bright, first check whether the installation site has sufficient sunlight. At this time, check and replace the line in time