Domestic reducers have made rapid development in gear technology

Posted by planetaryreducerr on March 18th, 2021

At the same time, in recent years, domestic reducers have made rapid development in gear technology. The industry standard of the reducer is the prelude to the transition from the past 7-degree accuracy to the 6-degree accuracy.In the context of the global economic crisis, a group of companies that originally focused on exporting reducer have turned to war to win the domestic reducer China Helical Worm Gearboxes Manufacturers market share, which has brought considerable pressure to reducer manufacturers that have originally positioned their export sales in the country.

Therefore, the reducer companies that were originally positioned to sell domestic reducer have higher requirements for the quality of their products. Compared with imported reducer equipment, it can be compared with it, but in terms of construction period, it is much shorter than the near-port reducer and is more competitive. At the same time, experts pointed out that the domestic reducer will be fully upgraded in 2012. Relevant persons in the reducer industry revealed that due to the country’s tax policy and external economic pressure, a whole batch of reducer companies have spent huge sums of money to purchase gear grinding machines and other high-end equipment from abroad, which has also opened up the domestic market.

Because of the same The price and quality are the export standards.Fault type Possible cause Treatment method Reducer overheating 1) Overload 2) Insufficient or excessive lubricating oil 1) Check the actual load, adjust to the specified value or replace the reducer with a higher power 2) Use the oil according to the regularity of the specified oil level Noise 1) Rotation noise, bearing damage 2) Knocking noise, irregular meshing 1) Check the lubricating oil 

Contact with the customer service agency Abnormal and irregular noise Lubricating oil has deteriorated or the amount of oil is insufficient Change the oil or refuel to the oil level Oil leakage from the air vent 1) Too much oil 2) Incorrect installation of the air vent 1) Correct the oil level 2) Correctly install and open the air vent leaking oil seal damage Contact the customer service agency The output shaft does not rotate when the motor is rotating Gear or connection key Send for repair