5 Tips to Take Better Care of Your Driveway Paving

Posted by Vancouver Safety Surfacing on March 23rd, 2021

Driveway paving in Vancouver often gets subjected to a lot of damage. People and vehicles walk up the driveway a lot, which is why it will inevitably receive wear and tear.

But there are things that you can do to take better care of your driveway Paving in Vancouver and make it last longer such as the following:

1. Regularly clean your driveway.

When dirt collects on the surface of your driveway, it can lead to the slow deterioration of the material. You should sweep your driveway at least once a week. Scrubbing it with a natural cleaner and water every few months can also prolong its “new” appearance. If you see stains or grease marks on the paving, make it a point to clean it and scrub it.

Don’t just randomly use a power washer. Some paving materials might be vulnerable to the damage brought about by the pressure from a power washer.

2. Use a sealant.

Ask professional pavers when you can use a sealant. Sealants help prevent moisture from seeping deeper into the paving material and can prevent the deterioration of the internal materials. Not all paving materials might require a sealant though so it’s best to consult a professional.

3. Get rid of standing water.

Water is the biggest culprit to the deterioration of paving in Vancouver. If your current driveway paving doesn’t have a good drainage system, water can stay on the surfaces of your paving for a long time. Excess moisture also makes your paving more slippery.

If this is the problem with your driveway paving, ask professionals what can be done to improve drainage. They might need to re-pave your driveway after fixing the drainage system.

4. Repair minor cracks and damages.

Don’t shrug off those minor cracks. Even small cracks can worsen over time. Dirt and dust can also get into these cracks, thereby speeding up the damage on your paving.

You can seal off or reapply the paving material on the cracks and damages. You can also do the same on the edges.

5. Be wary of using chemicals for de-icing.

These chemicals can be too strong for the material of your paving and can cause faster deterioration.

Watch out for signs that you need to replace your old paving in Vancouver. If the cracks are getting bigger and the sides of the paving are starting to wear out, you might need to hire professionals like Vancouver Safety Surfacing to change them.

You can take advantage of a different material that will be easier to maintain and will not cost you a lot of money. Make sure you do your research to find the best Vancouver pavers to do the work for you.

Adam Simmons is the author of this article. To know more about Paving Colour Options - Vancouver Safety Surfacing please visit our website: vancouversafetysurfacing.com