High tech iPad measurement microphone

Posted by tedmark on June 9th, 2015

When you want to bring your audio system into the high tech world you live in, you have to use the right parts for it. Today everything relies on mobile technology and apps to control the hardware you are interested in, but you must make the right choices from the start. Not every app is going to provide the same results for your acoustic changes.

But what are the options you can use so you can make it happen? How can you replace the old technology with new and improved solutions instead? There are quite a few things you have to take into account, but first you must focus on the components you will use. The first option you have at hand for improvements is the electronic crossover kit.

This is a relatively new development and it is meant to replace the old option with a better solution. The older active crossover kit relied on many different circuits to create the paths needed for better acoustic quality. The electronic crossover kit is going to take things further and it will use digital computation to render faster and better results.

The electronic crossover kit is just one part that has been improved. As it was pointed out, everything is shifting towards the mobile technology and devices and they are meant to make your life easier. If you turn to such devices so you can improve the quality of your A/V system, you should have an easier time and you should get better results.

A microphone is needed when you want to input the data from every speaker so you can analyze it, but you have to find the one that will meet your demands. Instead of relying on older versions, you can turn to the newer and much better iPad measurement microphone. This is the solution you need for accurate readings with far less effort.

Usually you had to connect the calibration mic to the PC or laptop. It was quite difficult to move around so you can get the readings from every speaker. This is why the iPad measurement microphone is preferred since the device is light, it performs the same tasks as a PC or laptop and you can analyze all the data you get on the spot.

You need some extra adaptors to make the iPad measurement microphone work and you also need to download the app to get things on the roll, but you are set to go once you get this done. There are a few other tasks you have to perform if you are interested in accurate measurements, but you have to find a source that will guide your steps.

Using the web for this is the first solution you will turn to. If you want to know how you can set up the high tech mic and if you are interested in making the right improvements to your system, you should visit the site of minidsp.com. This is where you are going to find all the details you need to complete the task.

An electronic crossover kit is a much better solution than a traditional active kit. If you want to use other high tech solutions to improve your audio system, the iPad measurement microphone is the answer. The site named before is going to show everything you need to know about this process.

Like it? Share it!


About the Author

Joined: December 28th, 2012
Articles Posted: 2,684

More by this author