dmx co2 jet fundamentals by yourpro equipment

Posted by John on June 14th, 2015

It is a difficult thing to try and understand professional lighting techniques. The key to while using full extent of any lighting system is within understanding DMX Lighting Fundamentals.

The first of the basics that must definitely be understood is in the word "DMX". It is brief for digital multiplex, and also the full term is really "DMX 512". The 512 means how many channels, or even control options, are inside a universe. A universe may be the total number of channels inside a DMX 512 configuration.

A lighting programmer would make use of a DMX 512 setup to manage lights, dimmers, fog devices, or anything that is actually connected into this information stream. It is sometimes easier to consider it in an effort to communicate with hardware, similar to the way a computer communicates with peripherals for example monitors and mice.

The dmx co2 jet fundamentals are channel assignment. As previously mentioned, there are 512 control channels in the universe. Each fixture, as well as lighting device, has a different amount of channels that may be controlled. For example, a Martin Mac 250 might have over fifteen control stations! These channels control the actual movement, rotations, color, gobo, and even speed associated with any device that is hooked up to and including DMX 512 universe. The channels should be assigned correctly for the fixture to become controlled by the machine, so it is critical how the correct manuals be conferred with before setup.

The final point from the basics is cable task. Before you can run anything on the DMX 512 system, you have to make certain that you are running the best types of cable towards the right fixtures. The most typical way to run cabling is within a sequence of result to input. This method, if there is an issue in the data hyperlink, the programmer will have the ability to find it quickly.

The cable that is used is very important. For some systems, there isn't enough output power from the mixer. smoke machine dmx cable can be used in this case in order to insure that data move is complete. Often occasions, a programmer will make use of XLR cables instead in order to save money. While this generally alright, consult the manual in your fixture or system to be certain.

The use of these types of three basic concepts can help produce a favorable illumination result. There are many exciting aspects towards the dmx fog machine system, which is sure to impress actually the novice user.

For more information, or to fog machine low lying, contact us at

Like it? Share it!


About the Author

Joined: December 27th, 2014
Articles Posted: 5,334

More by this author