How to fix HP 79 Service Error?

Posted by Arthur max on April 17th, 2021

HP printers are intelligent devices that can make a vast amount of files very easy to record and manage, regardless of how much we focus on the cloud. This printer is optimized for high performance, but it may be unable to print due to internal technical issues or external situational factors. Your printer produces errors in the form of coding errors. One of these mistakes is to address the causes behind this mistake, their methods of troubleshooting, and some advice on maintaining your printer. Let us dig into the reasons that lead to HP 79 Service Error.

Causes of HP 79 Service Error

By understanding the logic behind this error you mature far more efficient in stemming out the issue at its root level. Also, you develop a deeper understanding of maintaining your printer for future use. So let us look at the reasons here:

• The first reason is when your network is shared by too many devices.
• When your router needs a rest, it can cause connectivity issues.
• Sometimes stuck print ques can result in this error.

Troubleshooting of HP 79 Service Error

Let us look into some troubleshooting ways to resolve HP 79 Service Error

In this section, we will discuss ways to troubleshoot this error. Just make sure whatever solution you select, please follow the instructions in the order as mentioned. Without wasting any more time, let us get started:

Quick Fix 1:

The first solution to this error is to power cycle your printer. You can do so in the following ways:

• Ensure your printer is switched on.
• Sometimes it can go in sleep mode due to the long duration of inactivity. In that case, just press any button to wake the machine up.
• By pressing the power button which is located on the printer, switch the printer off.
• Locate the power cord at the back of your printer and disconnect it.
• Please make sure you have disconnected all the other USB cables from the printer too.
• Long press the power button to release any remaining power in the printer.
• You need to wait for at least ten to twenty seconds. This will help your printer cool off.
• After the recommended wait, connect the power cord back into the printer and the other end to the wall outlet.

Tip: You should make sure that you connect the power cord directly to a wall outlet and not to any power surge.

• Press the power button of the printer to switch it on.
• Wait for the printer to get ready. This wait helps the printer to initialize its internal functions properly.
• You have successfully power cycled your printer.

Quick Fix 2:

Sometimes the stuck print ques can lead to HP Printer Error 79. So the simple solution is to delete the print commands. You can do so in the following ways:

• Click on the ‘Start’ button or the ‘Windows’ icon.
• In the text box, type- ‘Control Panel.’
• Now click on ‘Administrative Tools.’
• Search for ‘Services’ and double click on it.
• Look for ‘Print Spooler.’
• Now you need to right-click on the ‘Print Spooler’ and select ‘Stop.’

Quick Fix 3:

When there are too many devices connected on the same network, the signals become intermittent and this can lead to this error. To resolve the issue please follow this instruction:

Tip: Try minimizing the number of devices that share the same network with our printer.

• Switch off your router for at least ten seconds.
• After the wait, switch on the router.
• There is a ‘reset’ button located at the bottom of your router device. Press it for a few seconds and release it.
• You will now see all the lights of the router flashing at once.
• Give your router a little while to restore its internal configuration.
• Reconnect the PC and the printer to the network, and you will see that the error has got resolved.

Source URL: HP 79 Service Error