Is Your Chromagen Solar Hot Water Service Working Properly?

Posted by Mark Taylor on April 24th, 2021

Can you reside in Australia and have a Chromagen split platform solar hot water services? Have you any idea whether this system is functioning correctly? Do you understand how to check whether the machine is functioning correctly?

Primarily, what's a solar break system?

A hot water solar as a service Split system is really where you'll have a tank at floor level along with a pair of collectors in your own roof. A circulating pump carries cold water into the collectors and warm water in the collectors into the tank or air.

Please, do not void your guarantee!!

Doing the measures below will enable you to find out what is wrong with your own solar hot water support divide system. Please do not go any farther. Shifting and eliminating any of those wires that are attached or pipework can invalidate your guarantee. Most things on your own solar hot water service have to be serviced or replaced by an experienced service technician, or at your regional plumber or plumber.

The best way to Learn if your own Chromagen hot water agency is functioning correctly

Primarily, directly in the center of the cylinder there will be a sizable numbing lotion cover. Remove the four screws and then remove the cap. You'll come across a tiny white box using four screws holding on the front cap , remove screws. Bear in mind there is dangerous live electricity within this box, so please do not touch any cables. At the upper right hand corner there'll be two directed signs, these signs will reveal to you whether all is functioning properly or when there's a issue. On the back of the snowy cover which you eliminated is going to be descriptions of the indexes do to let you know exactly what's happening.

Exactly what the indicators will inform you:

When the machine is dormant (not doing anything but functioning correctly )
When the flow pump is functioning (procedure is circulating hot water)
When There's a malfunction in either of the cables in the panels and also the tank
When the machine is in its own frost protection period
When the machine is in its own boil shield stage
What the indicators will not inform you:

When the control box is faulty - that the only way to verify this would be to join a working control box and see whether the system works afterward.

When the machine has an atmosphere block - when there's an atmosphere block everything else will work good however, the circulating pump will not flow the warm water out of the panels. There's just 1 method to determine that is your error; on a bright day once you understand that the circulating pump is hoping to circulate, put one hand to the return from the panels DANGER: when the machine is functioning correctly there's a true danger of you becoming severe burns in the piping because the warm water out of the panels may hit up to 160 degrees Celsius. My proposal is to simply tap on the return to find out whether it is hot. When it's then is well, in case it is not then there might be a issue and you'll have to telephone the aforementioned toll-free amount.
Maintaining the control box flipped - why it is vital

Having a Chromagen solar break platform that the sole component that keeps the machine functioning well is your control box along with the circulating pump. Without both of these components working with their intended power your Chromagen warm water agency will not do the job correctly and you perhaps will void your guarantee in your own solar panels.

The circulating method is the principal freeze protection. Please also be certain you've got an anti trickle valve (a little brass valve chiefly in the bottom from the hot water solar panels) since this is the secondary anti freeze security. Please, remember that the energy point the control box is plugged to stays about and the power cable is firmly pushed inside.

Your anti trickle valve

Each solar split system ought to have a anti trickle valve installed to the solar panels whether it is an'open loop' system. If you're not certain of you kind of solar break system please phone Chromagen on the aforementioned toll free number.

Anti trickle valves are made to start up as soon as the temperature reaches approximately 4 degrees Celsius. The valve will discharge a tiny quantity of water till it finds the temperature has increased or the valve was heated above about 6 levels. It is going to then cut and no water ought to be leaking . After the valve falls below 4 levels it will repeat the cycle. Anti trickle valves should cut off the water flow in no more than 2 degrees Celsius, therefore if a anti trickle valve remains leaking and the warmth in the valve is greater than 8 levels then your anti trickle valve is probably faulty. You need to get in touch with the aforementioned toll free number to get a trip with an approved service representative.

For More: See Here