Is Powder Coating More Durable Than Paint. The short answer now you ask that yes powder coating is a bit more durable than liquid coating. The reason powder coating is much more durable, is due to two primary facts. First, powder coating applied in a veryPosted by Bendsen Thompson on April 25th, 2021 find , 2018. Even though many consider powder coating the harder durable and efficient selection for finishes on metal surfaces, powder just isn't an option for rubber, which melts when exposed to the electrostatic process. Powder can even be harder to color-match, specially when metallic colors are involved. Your Source For Powder-Coated Parts When you are looking at durability, powder coating is the clear winner. This characteristic is one of the primary great things about powder coatings. Many ingredients will go right into a powder coat, including acrylics, epoxy, nylon and polyurethane, many of which offer better durability than others. Regardless from the ingredients, powder coating uses electrostatic energy to bond the powders towards the surface. Because with the way it adheres to the metal, powder coating is a bit more resistance against scratching, peeling and chipping than paint. It will move using the metal as an alternative to flaking off. Once this occurs, with either finish, rust can develop more rapidly. A more durable powder coat will keep rust at bay by preventing corrosive agents from reaching the metal. Plus, powder coats can't be applied thinly, therefore the thicker layers help with keeping the metal protected. The increased reliability of powder coats means they are excellent for high-traffic or heavy-use items, like handles, fences and appliance parts. Spray paint... Painters QMS : Oct 09, 2019. Powder coating offers a durable protective finish on the metal or iron products for the same cost of wet painting. This coating remains safe and secure to keep, doesn't emit any VOC's and expenses under wet paint in the end. This product is a free-flowing, dry powder that can easily be collected and reused, so that it is more green. The average transfer efficiency of powder coating is 60-70% and any over spray is often a solid and can be reclaimed and re-used netting hardly any wasted product. With liquid paint there is a transfer efficiency of 30-35%, roughly 50% in the product is evaporated and there is no possibility of reclaiming over spray. Painters ERP software , 2019. Powder coating carries a amount of benefits, one ofthese has already been mentioned earlier. Powder coating a metallic object allows for a dense sturdy finish, tougher than conventional paints. Secondly, this technique only uses a single coat so it is fast, efficient, as well as simple.Like it? Share it! More by this author |