What should I do if my smart TV remote control is out?

Posted by sere on April 30th, 2021

Smart TV remote control is very important in smart TV, if the smart TV remote control failed, it will affect our normal use of smart TV. The next step by meide smart TV remote controller, introduces the failure of the smart TV remote control.

Smart TV remote controllement solution

1. Check if the smart TV remote control battery is good.

Many times because batteries are loose or adversely causing smart TV remote control, so as long as the rear cover is removed, the battery will be reinplanted and restored.

2. See if the smart TV remote control battery is no electricity

If it is not a problem, the new battery, try, in general, most smart TV remote control failure issues can be resolved by new batteries. Check if there is obstacle between the remote control and TV

3. Check if there is obstacle between smart TV remote control and TV.

The smart TV remote control is transmitted by infrared, if there is an obstacle between the TV and the remote control, it is not possible to control the TV. Therefore, there is no obstacle between the TV and the smart TV remote. If there is an obstacle to transfer it, then try the remote control to restore normal work.

4. See if the smart TV remote control is aligned with TV

If the smart TV remote control does not align the TV position, the button is button, because the TV cannot receive an instruction to the smart TV remote control, and cannot remotely control the TV, so it is necessary to confirm whether the remote control is to align the appropriate part of the TV. A simple approach is to get the smart TV remote control before the TV, and then try the remote control to be valid.

5. Check if button rubber wear

If the above points are no problem, the reason why the smart TV remote control has failed to be the remote control because the time is long, the button is frequent, resulting in a serious rubber wear on the button. In response to this problem, the cover of the smart TV remote control can be opened, and the aluminum foil paper on a long cigarette box is scratched, and the long width is just the same as the button size, and then painted strong glue on the non-metallic surface, and put the aluminum foil Paper sticky to the button, then cover the cover. Under normal circumstances can also be solved.

6. Re-pair for smart TV remote controls and battery

Many smart TV cannot be used after upgrading to use the smart TV remote control, need to be rebounded.

As a millet TV (other brand according to the specification step): close to the smart TV, press the homepage and menu keys on the remote control, and hear a system prompt of "Drip" can be completed.

If the above methods can solve the problem, then you may need to contact the new remote control.