Checklist For Industrial Clothing - Highway Work Zone SafetyPosted by Juarez Feldman on May 11th, 2021 Highway work zones carry a variety of potential hazards. Consider safety issues that come with construction jobs generally and then factor in high speed traffic, night time work, exposure to the elements and additional hazards that road crews face. Personal protective equipment, or PPE, is essential on the job site, alongside safe working procedures and engineering guards, to ensure worker safety. The set of hazards for road crews is long, so here is a checklist of industrial supplies and the industrial clothing that will serve as PPE. Industrial Clothing As PPE The clothing that workers wear face to face counts for a large portion of comprehensive personal protection equipment. Industrial clothing covers a lot of the body and with the proper materials and accessories provides a significant layer of protection. At the essential level, heavy duty apparel provides protection against cuts and abrasions alongside weather and temperature conditions. Industrial clothing may be the foundation of visibility face to face site. When working during the night or during either of the twilight rush hours, motorists traveling at highway speeds will have difficulty spotting workers and stopping their vehicles if necessary. In fact, motorists will require about 1200 feet of stopping distance. High visibility clothing is designed to offer roadside visibility up to minimum of 1200 feet. Visibility work standards require the use of retro-reflective materials on the chest, arms, and legs to outline a worker. Specialty apparel is also used to address other hazards face to face. Even in construction, there are fire hazards present. industrial clothes rail and diesel fuels all have the potential to emit flammable vapors that may ignite if not stored correctly. Paints and solvents may also be flammable alongside resins and epoxies. Hot work carries the potential of flash fires and arc fires, both of which occur in only an instant but remain life-threatening. Flame resistant clothing and coatings will certainly reduce the severity of fire and heat related injuries. Self-extinguishing, non conductive and non flammable materials and coatings will save lives. Integrating Head, Face, And Eye Protection Safety culture has come quite a distance over the years and one of the greatest advances has been the ubiquitous use of hard hats. Across every job site, workers are wearing hard hats around the clock, offering the best protection against nearly any impact blow to the top. Hard hats have also evolved to having the capacity to support a variety of personal protective functions with accessories and attachments. Having the ability to integrate many safety features into one device is essential for ensuring good safety practices and that PPE is actually used as instructed. Hardhats can be outfitted with ear plugs, ear muffs, face shields, goggles, and welder's masks so as to extend protection to the facial skin, eyes, and ears. When using PPE to safeguard these vital areas, all equipment has to be routinely inspected. Hardhats ought to be replaced after sustaining any major blow, even though it does not seem to be damaged. Usually do not drill holes into a hard hat or clean them with strong detergents or solvents. Stay away from paint or stickers in it as well. Always get a new hard hat after the expiration date; even the sun's Ultra violet rays can break down plastic over a long enough period of time. The same procedures apply to face and eye protection. Safety eyewear needs to provide protection to leading and side of the facial skin and really should fit securely. Any damaged equipment ought to be replaced and any glasses which have become too scratched as to impede vision have to be swapped out as well.Like it? Share it! |