The Solution Of Rock Button Bits Running Drill

Posted by kaiqiudrilling on May 13th, 2021

　　Water Well Drilling Tools has a simpler power, simpler structure, and characteristics of use. It is very suitable for operations on sites with more complex terrain. What should I do if the down-the-hole drilling rig is "running" when it is in use? So we must first understand the cause of the problem and find a solution.
Because the diameter of the drill bit and impactor assembly is larger than the diameter of the drill rod, and the length is also longer, the distance between the drill bit and the drill support is also relatively long, and the drill rod has a certain elasticity, so it is irregular During excavation operations on the rock, it is very prone to "running drilling" phenomenon, that is, the rock hole deviates from the axis of the drilling rig. In this case, if you continue to drill, it is easy to cause the drill rod to bend, and even "don't drill" phenomenon occurs, which makes the drill unable to work, and this situation will also cause serious damage to the down-the-hole drill itself.
　　 In order to solve this problem, a drill bucket can be used to support the locator and install it on the two legs at the front end of the drill. Practice has proved that the positioning effect is good, and the positioner can solve the "running drill" phenomenon very well.
　　 Through the above introduction, when Rock Button Bits has "running drill" phenomenon, I hope you can solve it better.