Installation of Jockey Wheel Trailer

Posted by Damborg Bjerring on May 18th, 2021

A jockey wheel or trailer jockey is an easy-to-use, self-contained device primarily designed for lowering and raising the coupling end of a trailer and for stablekeeping the rear of the trailer while towing it to and from another vehicle. It really is used to reduce the strain on the trailer's tow-line. A wheel jack may be the device that raises and lowers the trailer, utilizing a hydraulic system. A jockey wheel acts because the "punch" arm by raising and lowering the trailer with its crankshaft. The trailer is then moved combined with the crankshaft of the trailer by the towing arm. Jockey wheels could be either directly or indirectly driven; the latter type of wheel is more regularly used.

There are several types of jockey wheels, each suited to particular circumstances. There are basically two types: straight shafts and counter-rotating shafts. ratchet jockey wheel differ with regard to design, size, type of material used and the way they are fitted. The most frequent forms of trailer jockey wheels are the straight shafts and the counter-rotating ones. The straight shafts feature a single large counter-rotating arm that is placed in the center of the wheel, that includes a cross bar attached at another end.

These arms are connected by way of a large number of smaller arms which are fitted at the ends of the main body. All the arms have a cross bar attached so that the upper surface of the wheel could be lifted by it easily. Alternatively, the counter-rotating ones feature an arched design with a series of vertically mounted clamp brackets around the outside of the arm. These are fitted over the trailer jockey wheels and engage the wheels at their ends. Clamp brackets may also be found in tandem with the jockey wheels to lock the trailer securely in place.

Mounting brackets, subsequently, are created out of different materials. Some of them are made out of steel, while some are created out of aluminum or plastic. The former is more preferable since it is stronger and is light-weight; while the latter could be cast, but is comparatively expensive. It is very important decide on the mounting bracket that may work best with the trailer. However, all jockey wheels and mounting brackets are relatively easy to set up on trailers of any kind, irrespective of the kind of vehicle they are destined to be used on.

The next phase entails mounting the wheel on the trailer, where it'll engage the trailer's winch system and the cable ties. At this point, installation of windshield or roof shingles will come in to the picture. Next, the cable will run from the winch to a cable trimmer to the wind shield and lastly to a cable cutter to complete the job.

Once installed, it is advisable to practice driving the vehicle minus the load on it for a couple days to ensure that the device is in perfect working condition. However, when going over rough and uneven surfaces, it is important that you utilize pneumatic tires because they offer better traction on soft and muddy ground. Apart from utilizing the appropriate jockey wheel on the trailer, additionally it is important to make use of a jack to raise the vehicle to a working level. Guarantee that the vehicle is raised utilizing the right method - usually utilizing an extension ladder - and is maintained properly so as not to cause damage to the automobile or its components when raising it. Finally, be sure to drive the automobile slowly and cautiously on the rough surface, taking care never to step on the gas or the brake pedals.