Die Casting Using Magnesium ? The Best Casting Option

Posted by sunainaram on September 23rd, 2015

Die casting is a process by which molten metal is forced to take the shape of the mould it is poured into by using high pressure. During the process of casting, the hardened die acts like a metal injection mould. Various metals are used in the process of casting. Most castings are made from metals that are non-ferrous in nature as they are durable and strong. The list of die cast metal includes zinc, copper, aluminium, magnesium, lead, tin and so on. Magnesium die casting is the most popular and widely for die casting.

The use of magnesium has gained a lot of popularity because of the characteristic features of the metal. Magnesium is one of the easiest metals to carry out the process of die casting because of its inherent properties. Plus, it has a lower melting point when compared to the other die casting metals. So, the casting process takes lesser time for completion, which will allow manufacturers to increase their daily production count.

Even though this metal is lightweight, it has immense strength. Its lightness makes it the prime reason for use in many production processes. Magnesium is also less expensive when compared to other thermoplastic materials. This metal can also be used to create products with thin walls as it retains its strength even when its thickness is less. It is a corrosion resistant metal, which is not affected by environmental factors like air, water and moisture. Magnesium is also recyclable, which means more savings in the long run. Plus, you don’t have to deal with waste management. It helps save money by reducing the need to procure new metal every time, and on the other hand, it recyclable nature makes it an environmentally friendly raw material. All these factors make magnesium a good choice for die casting.

While creating the Metal Injection Mould for Magnesium Die Casting you can add in all the minute details in the cast design. Based on the product, you can decide where to set the parting line, about the number and placement of the ribs and other features. If you want you can also add your company logo and manufacturing particulars while creating the cast design. So, the final product will come complete with all the details embedded, and all you have to do is give it a final finishing touch and send it down the delivery line.