Increasing the efficiency of your chiller

Posted by Ryan Smith on September 23rd, 2015

For many commercial and industrial facilities, chillers are an appliance, responsible for their mammoth electricity bills. As they are a pricey utility, their frequent and proper maintenance turns out to be an important stunt. While some organizations prefer employing their own technicians, there are many who assert that the maintenance of chillers is not an attainable exercise for one or two in-house technician(s). They persist that a chiller or air conditioner service in Dubai should be hired for this task.

Apart from hiring a service for chiller maintenance in Dubai, there are several routines that you can perform on your own to augment the span of this machine. If you are a technician working at some industry or commercial building, you should write down these stunts in your to-do list, and if you do not possess any technical comprehension related to ACs and chillers, then also you can follow these steps –

Prepare and follow the operating log register. One of the foremost tasks is to maintain a document stating the behavior and performance of the machine on a daily basis. Doing so, helps keep track of the defects and deficiencies in the performance of chiller. Whenever you notice some deserts in the routine and manners of the machine, you know it is time to call in an expert service.

Keep the water supply tubes clean. By keeping the hose clean, you will be making sure that the cooling is per the setting of the chiller control panel. When the tube is clogged, you might observe it is not cooling appropriately. The tubes are responsible for transferring the heat, and when they will be clogged, the machine will not be able to transfer the heat and maintain the temperature and moisture inside the building. To ensure fluent and effluent performance of your machine, it is of high significance to keep the heat exchanger tube clean. If you notice that the tube is congested, and the cooling is not as it should be, you should speak to a chiller maintenance service in your locality, and call them over.

Check the level of oils and refrigerants. For the smooth run of your building’s chiller machine, it is paramount for it to be equipped with sufficient oils and refrigerants. You should check the level of oils and refrigerants annually, and every time you drop in the chemicals, note it down in the diary or document, mentioned above. Do make certain that the oils should be of branded make.

Treatment of water – Chillers transfer heat with water, therefore there should be made due arrangements for the treatment of water - the water that goes in, runs through, and comes out. Additionally, the water that runs through the heat exchanger tube should be cleaned, purified, so that a breathable environment inside the building can be catered. You can ask a chiller maintenance service in your locality to make due arrangements for the water treatment.

The author has written article on Chiller Maintenance Dubai. Here he is sharing his experienced and providing information about Dream Cool AC System LLC that is known the Air Conditioner Service Dubai

Like it? Share it!


Ryan Smith

About the Author

Ryan Smith
Joined: August 28th, 2015
Articles Posted: 6

More by this author