The oven section of fiberglass chopped strand mat production equipment

Posted by zccyfiberglass on October 29th, 2015

Drying section is made of tunnel insulation and equipped with a conveyor belt. Drying cross section is heated by direct gas system. The dryer is divided into regions. Each district has a circulation fan and independent temperature control.

1.Conveyor

Belt conveyor is a special, the upper side of the stainless steel mesh, mesh belt by a series of ball bearing mounted roll support. Cleaning brush and clean the burner is mounted on the conveyor belt. And equipped a transfer guide and tensioning system.

2. Ventilation

Above and below of the upper belt installed special air distribution box for blowing and smoking.

They make the air on the surface of fiberglass chopped strand mat can be rational distribution and ventilation. It is evacuated by installing air filters.

The sport of each sector in the air is provided by the heavy-duty ventilation. Fans and air insufflation and suction pipes and boxes structure to make cleaning operations easier.

3. The exhaust air

In this session, the circulating air blower provides exchange.

4. Heater

Each section is equipped with its own gas burner. After the transfer material is dried, hot air sucked by the housing and thus return to the cycle. Fresh air through the filter pores.

5. The combustion and temperature control

Each burner is equipped with temperature regulation group.

Each group comprising: temperature regulation, maximum and minimum thermal conditions, combustion cycle timer

Flame control

Exhaust and combustion air predictable pressure control.

All of these aspects will be placed in a control panel.

6. Clean and inspect insulation

Drying tunnel made of iron U-shaped profile, covered with insulation board a sturdy frame composition, pore structure is not removable.

By planning the structure, we have considered the thermal expansion and the necessary provisions. So the insulation panels made of special iron tablets. They are filled with glass wool.

Along the sides of the oven, at the right distance, it is mounted inspection door.

Each oven is equipped with an opening, easy to clean and maintain.