Concrete Fasteners Korea

Posted by Kim. on December 15th, 2015

The Nylon Nailin may be a nail drive anchor with a body shaped from built plastic and

drive nails accessible in carbon and stainless-steel. The anchor are often employed in concrete,

block, brick or stone. The anchor is pre-assembled with either a steel or unblemished

steel nail. This anchor isn't suggested for applications overhead. For overhead

applications, please seek advice from the Zamac Hammer-Screw.

Ideal for light fastening into concrete, brick or

block base material. Nylon nail-it anchors aren't suggested for

structural or overhead applications. Nylon nail-it anchors are available in 2 diameters

– 3/16” and 1/4”, and 3 completely different head designs – mushroom, spherical and flat.

GENERAL APPLICATIONS AND USES

• Brick Ties and Masonry Anchorage • Furring Strips

• Electrical Fixtures • Maintenance

• Copper Flashing • metal Frames nut and bolts korea , nylon nail anchor manufacturer

Wedge Anchors

Wedge anchors square measure a steel stud with one in all its finishs rib and also the alternative end having a

clip to line wedges between the stud and concrete. they're just for use in solid concrete.

Designed for light-weight to industrial anchoring into solid concrete. The concrete wedge anchor

is available in Zn plated steel, stainless-steel and hot-dipped galvanized. Wedge anchors

come in 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, and 1-1/4” diameters and plenty of completely different

lengths to accommodate varied thicknesses of fabric to be connected to the concrete. Anchor

diameter is up to hole diameter. Stainless wedge anchor korea

Sleeve Anchors

Sleeve anchors square measure created of rib rod beveled on one finish, a sleeve that goes over the

rod, and a nut and washer that square measure all assembled into one single piece. Turning the nut

pulls the operating finish of the sleeve anchor up through the sleeve to expand and anchor itse

lf firmly in concrete, brick or block.

insulation insert manufacturer korea

Kim Jinman General Manager

HYESUNG IND CO.

Address : 306-120 114, Beotkkot-gil, Daedeok-gu, Daejeon, South Korea

Tel : +82-42-635-1455  

Fax : +82-42-636-1455

E-mail : jmkim0101@hotmail.com

Website: www. hsanc.co.kr

82328177564