Beadboard Wall PanelingPosted by Bachmann Hill on June 17th, 2021 It's less formal than raised panels, but is correct in your own home in a very country or rustic environment. Beadboard is versatile enough who's looks good in almost every room inside your home. You will find it in 4 ft. by 8 ft. panels inside the big home centers like Home Depot. Usually, the panels run about each, are 3/8" thick, and they are made of pine. This is a soft wood which will expand and contract with changing seasons, so paint the panels prior to deciding to add the underside and top rails. The beads on these panels are about 1 1/2" wide. If you want more width, you will need to by tongue and groove boards and place them individually. If you take this path, the charge will probably be greater, and also the installation time will likely be more, however, you have much more choice regarding the look with the paneling once it's finished. I have visited several historic buildings through the years, and also the Early American carpenters were pretty imaginative about how precisely they assembled beaded wall panels. I've seen 3 or 4 widths combine inside a repetitive design; alternating 2 widths; and I saw a space where 8" wide planking was applied using one wall and two 1/2" wide beadboard was on another wall. Having imagination about these items is all good, though the steady, constant repetition brings a sense of uniformity that I believe is exactly what most of the people seek out. Height is an additional aspect where you could have plenty of flexibility. The minimum height needs to be "chair rail height" or 34" across the floor. However, imitation brick wall panels could possibly be better served if your panels were 40" high, or 48", or 60", or anything among. The most important step is always to make templates or sample pieces beyond cardboard or some other inexpensive material. Tape these phones the wall leave them there for 2 days. Then repeat the process, using a different height. Decide which you prefer best, and choose it. Your top and bottom rails needs to be notched out within the back so your panels fit inside rails along with the rails touch the walls. This will eliminate gaps between your rails and the walls. Some from the most popular ways people use beadboard are: To cover entire interior walls. As wainscoting on either interior or exterior walls. To cover ceilings - inside coffers, more than a small area of an area to discover it through the rest from the room, or as porch ceilings. As backsplashes in have a peek at this site . Instead of ceramic tileon bathroom walls. As recessed panels in cabinet doors. In fake brick , beaded wall paneling has stood quality of time. It has been around for years and years and is versatile enough to possess many applications. Beadboard has visual appearance and charm, and it is priced for anybody's pocketbook.Like it? Share it! More by this author |