Hire a contractor to complete your acid stain concrete job by fabcrete

Posted by John on January 10th, 2016

Acid stain concrete is definitely an old technique that has seen resurgence within popularity. Concrete floors are considered to be durable, low maintenance, and extremely ugly. If you learn to acid stain concrete floors you are able to keep the durable, low maintenance surface whilst turning your ugly grey surface into a beautiful thing of beauty. Most acid stains will be earth tones. This consists of many shades of browns, darkish reds, and greens. These earth tones can give your floor the appeal of expensive stone or even marble, for significantly much less.

If you are not the do-it-yourself type of person you are able to hire a contractor to complete your acid stain cement job. For a basic job you will in all probability pay around for each square foot. If you'll need a more detailed and elaborate pattern (multiple colors and designs) you will be charged you anywhere from - for each square foot. If you just want a fundamental job done it is strongly recommended that you do a do-it-yourself. Instead of paying the contractor per sq. foot, you can take action for $. 50-. 00 for each square foot, and it will only take a couple of hours over two days to get the job done. Even if you really are a DIY novice, you will be able to handle this type associated with project. Here are four steps how to acid stain cement.

Get Your Materials

You need to ensure that you have all of the materials necessary before starting the task. Since you will be dealing with a weak acid it is crucial that you protect your self fully. This means putting on long sleeves and lengthy pants, protective eye put on, a face mask, as well as gloves. Other materials required include: Acid concrete spot, sealer, concrete cleaner, broom, moist vac, sprayer, paint holder, and a roller.

Prepare the top

Since the acid spot is semi transparent any kind of blemishes or cracks about the concrete will show via. Hairline cracks can provide your acid stained ground more character, by other things should be repaired. You will have to clean the concrete towards the best of your capability, the better you have it to look now the greater it will look once you apply the stain.

Utilize the acid concrete stain

There are a few ways to get this done step, but I would rather use an all plastic material sprayer. One person should spray about the acid stain to the concrete as the other follows behind as well as brushes it in having a broom. This will leave brush strokes therefore the sprayer should go within the area again. Repeat this method until the whole ground is covered.

Wash the ground

After the floor has already established the proper time to react it's time to wash the ground with a baking soda pop and water solution to be able to neutralize the concrete acid stain and remove any kind of excess residue. You are going over the floor with this particular solution at least two times.

Apply the stamped concrete sealer

When the floor is completely dry you need to apply 2-3 coats of sealer together with your paint roller. As soon as the ultimate coat is dry start using your beautiful brand new floor. This is the simplified guide on acidity stained concrete floors. Follow this link for a complete, comprehensive, step-by-step guide on how you can stain concrete floors.

When you are thinking about services of how to acid stain concrete we can recommend http://www.fabcrete.com/concstain.html for thousands and good advice.