This Week's Top Stories About hot platen press machine

Posted by Mae on June 24th, 2021

With the quick growth of structure industry as well as glass production, glass deep handling market has additionally established thoroughly. This write-up mostly describes the large application of level glass cleaning equipment in the glass market.

1. Concept of glass washing device

As the unique tools used in glass market, glass washing machines are used for cleansing as well as drying original glass sheets. According to cleaning approach, it can be distinguished vertical glass washer( upright glass washing machine) and straight glass washing machine.

2. Wide application of flat glass cleaning machine

Currently we majorly introduce the large application of horizontal glass washing machine.

( 1 ). Cleaning application for common glass

The cleaning process of level washing machine for average glass is basic reasonably. The containers can be feed with commercial water without heating. Because the surface of glass has actually not been made any type of treatment, there is no unique requirement for the brushes on the glass washing machine. At the same time, there is also no too restrictive need for water PH. About the air blade hot press machine for sale layout, we can take on normal structural but should make certain the wind power can be readjusted. When we cleanse the glass with thickness 3-19 mm, the style of range in between rollers can not be considered making too big. Typically talking, the manufacturing facility might make use of center or little washing machine to do the cleansing and also drying job for raw piece of regular glass

( 2 ). Cleansing application for warm-edge shielding glass

For the manufacturing of warm edge insulating glass (with versatile spacer, such as duralite or duraseal or superspacer), the cleaning needs to the raw glass sheets are greater. Operators needs to make sure the good cleansing as well as drying out for surface in order to comfortably make the spacer bonding for the following actions, at the same time, preventing surface scrape. For most developed nations as well as locations on the planet, in order to make the entire cozy side I.G.U, more and more factories adopt straight cleaning maker. This kind cleansing devices is made up of feeding area, cleaning area, drying out section and result area as well as in the washing area, there are 3 containers which feature of cycling heating water with the suitable PH (6-9), meanwhile, the device has to be set up with premium quality rubber transfer rollers to prevent glass damaging. Furthermore, designers ought to design unique air blade structure applied in drying section of the washing machine, such as side-by-side several wind blade layout, as well as assure the sufficient wind power as well as make it flexible, as the most effective drying outcome, the air blower can blow hot air. All these considerations can achieve the superb drying out task: totally cleaning up or blowing off water in multi-angle and also much area. Please also note that in order to match the complete production line, the speed of glass washing machine additionally require to be managed.

Comment: the production process of flexible spacer I.G. usually has listed below makers: level glass washing device, versatile spacer assembly table, glass assembly table, warmed roller press maker as well as glass convey table. Total production line has two-side or solitary side facility. Glass is communicated to glass washer in the straight state after that begins its very first process until to end up hot-press securing task in warmed roller equipment. Around the production line, small aide tools, such as gas filling up machine, duraseal spool stand are also outfitted.

( 3 ). Cleaning up application for layered glass

Before washing finishing glass by the horizontal washing machine, we must take right into account the choice of brush and water quality. In cleansing procedure, the layered glass sheets must not stop under brushes to avoid damaging the movie.

Utilizing demineralization or deionization water to spray coated glass to assure no residue when drying glass. The technology of this procedure may raise water destructive, so we must evaluate the sample water and also verify no damaging reactions happen. Additionally, prior to large manufacturing, we likewise should do some trial manufacturing to establish that if the water can function well in the system.

In actual procedure, address the above troubles, both straight glass washing machine and upright glass cleaning device can well complete cleaning and also drying task to layered glass.

( 4 ). Cleaning application for other glass (such as tempered, laminated and also safety glass).

As above glass features of plus size, thickness and weight, manufacturing facilities commonly make use of horizontal cleaning maker to complete their cleaning job. For the upright washing machine, due to its structural restrictions, it can not suitable for cleaning large size glass. By means of selecting appropriate soft brushes as well as making use of different air blade structure, the horizontal glass washer can fulfill the cleaning as well as drying demand for above glass.

3. Possibility of straight washing device.

In the last years, building glass has been established in the direction of protecting, energy-saving, safety and security and design, so the horizontal cleaning makers are additionally improved with the very same instructions. Particularly after the solar glass, conductive glass, foam glass and also various other special glass are widely put into market, the factoies put onward greater cleaning needs to over unique glass.