Expose the rock layers through stamped concrete sealer by fabcrete

Posted by John on January 17th, 2016

Concrete includes a flaw as a building material in that it's porous and absorbs drinking water. This would be fine if all of us lived at the equator and also the temperature never dropped beneath freezing, but that unfortunately isn't the case for many people. When the temperature drops and also the water in the cement freezes, it expands and breaks small particles from the concrete off and starts crevices and cracks by stamped concrete sealer actually wider with each effective freeze. This allows much more water to enter as well as accelerates the damage.

This really is called a freeze-thaw period. When enough freeze unfreeze cycles have occurred in order to expose the rock layers just below the surface the damage accelerates much more and as the piece is penetrated deeper as well as deeper it becomes not able to support the loads it's under and failure happens. The base can after that be undermined and misalignment may result.

What can be achieved to stop this slow-motion damage?
The American Concrete Institute suggest that all exterior concrete given protected by a credit card applicatoin of a weatherproofing system to prevent the water penetration to the slab.

Which system is better for your particular scenario?
This can vary and should be assessed by a professional to get the best results. Call today to setup an appointment to figure out which system best suits your unique needs and stop the destruction of 1 of your largest opportunities.

acid concrete stain Provides you with a modeled old word try looking in earth tones, this process permantly colors the top of concrete and will not really peel, fade, and is actually permanent. Concrete condition is essential and no same application is exact since it reacts with the cement, can be used with regard to residential and commercial programs.

Decorative Scoring

This is really a very creative way to add borders, circles, diamonds, logo’s and creative markings within the concrete to separate colours and add character primarily utilized in acid and die based applications but may be used almost anywhere you imagination goes. This process involves gently scoring (cutting) the concretes area in 1/8”, ¼”, each tile and flagstone grout collection looks, ECT. This does not impact the structural integrity from the concrete and is achieved with very specialized tools and can be achieved on concrete, overlays, placed applications on both home and commercial applications.

When you are thinking about services of acid stain concrete we can recommend http://www.fabcrete.com/concstain.html for thousands and good advice.