EGR valve spindle is normally the case

Posted by zjautopartsLee on February 1st, 2016

EGR valve spindle is normally the case. The truth is, if you've properly locked down the rocker arm's adjusting nut, they shouldn't move--ever. And as long as you're checking your valve lash with the engine at a consistent temperature every time, they should all be within spec. Remember, aluminum expands greater than steel.

And with a lot of today's engines running aluminum heads, they're going to expand enough to add lash at the valves. It's ideal to set your lash cold, subtracting .002- to .004-inch for expansion every time you do it. Besides, lash is a great tuning tool, and you may find some power by moving lash around, so don't be discouraged to try a hot-lash adjustment, just remember that it won't read the same the following morning.

There are several misconceptions about valve springs that could could could could could could could cause you to accept the amiss set. You may be cerebration that your car's motor will not allegation acceptable springs because you're alone appliance banal valves.

Valve seat could be added from the truth. Banal valves are heavy, and too little animation burden accumulated with abundant valves is about the could could could could could could cause of valvetrain failures.

Like it? Share it!


zjautopartsLee

About the Author

zjautopartsLee
Joined: December 18th, 2015
Articles Posted: 104

More by this author