Beadboard Wall PanelingPosted by Munoz McCurdy on July 8th, 2021 It's less formal than raised panels, but is right in the home in a very country or rustic environment. Beadboard is versatile enough it looks good in about any room in the house. You can discover it in 4 ft. by 8 ft. panels in the big home centers like Home Depot. Usually, the panels run about each, are 3/8" thick, and are made of pine. This is a soft wood that may expand and contract with changing seasons, so paint the panels prior to deciding to add the underside and top rails. The beads on these panels are about 1 1/2" wide. If you want more width, you'll have to by tongue and groove boards and erect them individually. If you go this route, the charge will be greater, as well as the installation time is going to be more, however you have much more choice for the look with the paneling once it's finished. check out this site have visited several historic buildings through the years, and also the Early American carpenters were pretty imaginative regarding how they assembled beaded wall panels. I've seen 3 or 4 widths combine in a repetitive design; alternating 2 widths; and I saw an area where 8" wide planking was used using one wall and 2 1/2" wide beadboard was on another wall. Having imagination about these products 's all well and good, but the steady, constant repetition brings a feeling of uniformity that I believe is what many people seek out. Height is yet another aspect in which you can have lots of flexibility. The minimum height should be "chair rail height" or 34" above the floor. However, your decorative scheme may be better served if the panels were 40" high, or 48", or 60", or anything between. The most important step is to make templates or sample pieces from cardboard or some other inexpensive material. Tape these to the wall and leave them there for a few days. Then repeat, by using a different height. Decide which you like best, and opt for it. Your upper and lower rails ought to be notched out within the back in order that the panels fit within the rails as well as the rails touch the walls. This will eliminate gaps involving the rails along with the walls. Some of the most popular ways people use beadboard are: To cover entire interior walls. As wainscoting on either interior or exterior walls. To cover ceilings - inside coffers, more than a small percentage of a place to separate it from the rest from the room, or as porch ceilings. As backsplashes in kitchens. Instead of ceramic tileon bathroom walls. As recessed panels in cabinet doors. In conclusion, beaded wall paneling has stood quality of your time. It has been around for centuries and it is versatile enough to get many applications. Beadboard has visual appearance and charm, and is priced for anybody's pocketbook.Like it? Share it! More by this author |