Maintenance Skill of Loader

Posted by Pan Yu on March 19th, 2016

There will be a run-in period (about 60 hours). Run-in period is a critical part to ensure the normal operation of the loader, reduce the failure rate and extend the life. Therefore, the run-in period of the loader application and maintenance should be paid more attention.

Maintenance Skill of Loader
    
1. Wear speed
Parts processing, assembly and adjustment may result in  surface’s pressure difference. the friction surface roughness, with surface contact area is small, uneven surface pressure situation. During operation, uneven parts friction will accelerate mechanical wear.In this case, if the overload operation, it may cause damage to the components resulting in premature failure.


2. Poor lubrication
Since gap with the new assembly parts are small, it is difficult to ensure uniformity with the gap. Lubricants (fat) in the friction surface is not easy to form a uniform film to prevent wear and tear, thus, reducing the lubrication performance and resulting in the early parts of abnormal wear.


Use and maintenance of wheel loader for sale
1. Because of construction machinery is a special kind of vehicle, the operator should receive factory training, guidance, structure of the machine. Operators should have full understanding of its performance and be access to certain operating and maintenance experience before operating the machine.
2.Pay attention to the workload during wear period.Workload in run-in period is generally not more than 60% of load to prevent machine from overheating phenomenon for a long continuous operation.
3.Observe the meter indication often. If there is abnormal situation, stop operate immediately.
4.Regularly check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) position and quality, and pay attention to check the whole seal.
5. Keep the instrument clean, make timely adjustment, tighten loose parts
Do machine maintenance and do inspection and adjustment work while taking care to replace the oil.

Like it? Share it!


Pan Yu

About the Author

Pan Yu
Joined: March 19th, 2016
Articles Posted: 3

More by this author