Things to Consider During Hot Water Tank Installation in Ottawa

Posted by AirZone HVAC Services inc. on July 27th, 2021

A hot water tank needs extra special care and attention during installation, if not more than any other device. However, the materials used by the manufacturers are of the utmost high quality. You should remember that even high-quality materials would fail if they are subjected to high pressure and continuous usage.

You can get it replaced after a couple of years, but if the hot water tank installation is not done properly, then there are chances that your water tank will not last long as you'd hoped. Therefore, this article will explain a few points to consider during the hot water tank installation Ottawa.

1- There should be sufficient space

If there is not enough space around the hot water tank, the professional won't install the tank. You might have to get it replaced, which can be a tiresome task. You should always measure the area before ordering or buying the tank.

2- It should be placed at a sufficient height above ground

The height plays an important role because if the size of the tank is bigger than the height of the room, it will pose a problem. Also, most people prefer adding extra height to the tank to prevent the tank from touching the ground. This prevents any failures in case of flooding.

3- The wall should be strong

The tanks are not light, and they need to be placed against a strong wall. In the case of a solid wall, the holes should be drilled, and then the tank should be placed accordingly. You should have enough space around the tank for a professional to work in case of maintenance or issues. Also, the wall selected should not be damped. Avoid walls that get wet during the monsoon.

4- Unblock any water pipes

Before installing the unit, check the neighbouring water pipes for any blockages or congestion. If there are blockages, the water will not flow properly and put additional strain on the water heater. Hence, you should check the pipes and then plan on installing the tank.

5- It should have proper electrical connections

Since the tank will deal with hot water, the professionals should make sure that there are no live current wires in the area. Any loose electrical wiring could prove fatal and could put everyone in harm's way if not treated correctly.

6- The pressure release valve should be working smoothly

After the hot water tank installation, be sure to check the pressure release valves. Most people recommend checking the valves once a year to be certain they are in working condition.

Final thoughts

These were some things that you should consider before hot water tank installation in Ottawa.

Robert Morgan is the author of this article. For more details about Broken Furnace in Ottawa please visit our website: airzonehvac.ca