Self defense folding knives

Posted by nemarampunavat on September 23rd, 2021

One-hand knife: The advantages of a pocket knife that can be operated with one hand

There are numerous advantages to owning a one-hand knife. It’s always at hand when you need it. From opening letters to cutting an apple on the go – the knife is a useful helper in every situation.

The following is about all the advantages that it brings with it. There is also an insight into the various opening and closing mechanisms as well as the handle materials. Of course, there are also valuable tips on cleaning and maintenance.

The advantages of a pocket knife that can be operated with one hand

Different areas of application require the use of different knives – the one-hand knife, which is popular in many areas, is considered particularly versatile. As the name suggests, one-hand knives are models with an opening aid on the handle, with which the blade can be unfolded with just one hand. This way, one hand remains free and the wearer remains flexible.

Some models can also be folded in with one hand, although this function is not decisive for the categorization as a one-hand knife. The advantages of buying a pocket knife that can be operated with one hand and which model is right for you are shown in a clear list of all the special features. The competent team at Knife Master is very knowledgeable and is happy to advise you on all the basics.

Variations – the opening aid determines the model

One-hand pocket knives differ in their function and construction, especially with regard to their opening mechanism. The mechanism enables the one-handed operation of the pocket knife without the risk of injury and time-consuming pulling out.

The most commonly used opening mechanism is the so-called opening pin, a pin that is firmly connected to the blade and is usually attached with rivets or screws. With this opening mechanism, the blade is pushed back and forth with the thumb, just like with the stylishly crafted outdoor carbon one-hand knife.

The opening pin provides a great advantage. It allows a knife to be easily converted to a two-handed opening without any noticeable loss of appearance.

However, there is a disadvantage when sharpening the blade. The pin is simply in the way of the grindstone, which makes the process difficult. In addition, it can be perceived as annoying if the knife is pulled out of your trouser pocket, for example.

Another variant of the one-hand knife is the patented folding system with a hole in the blade. The blade has a finger-sized hole that makes it easier to open and close the knife. Models with this opening aid allow for an attractive design – the hole and handle are matched to one another, as is the case with the functional Pazoda 2 by CRKT in an aesthetic metallic look.

The flipper as an opening mechanism

The third common opening aid for pocket knives, which can be opened with one hand and, depending on the version, also closed again, is the so-called flipper.

It can be described as a small nose that protrudes from the blade hinge. When the one-hand knife is closed, it protrudes from the spine of the booklet. With a little practice, the blade can be folded out by quickly pulling back the lever protruding from the spine.

A smooth blade hinge is particularly important with a pinball machine. The reason for this is that the finger gives the blade only a slight impulse because of the short path. This is achieved with washers or ball bearings.

On some models, a small cam holds the blade in place lightly. This allows the finger to build up a little more strength. Other models, on the other hand, nonetheless require a quick sweeping motion from the wrist in order for the knife to open completely.

The flipper doubles as a crossguard when the one-hand knife is unfolded. This is a small cross piece between the handle and the blade. It is used to protect your own hand. It prevents the blade from slipping forward, which can happen quickly, especially when cutting hard clippings.

The pinball machine is often combined with an opening pin. The pocket knife with ball bearing 1013BK from MTech USA with a stainless steel handle is an example of a flipper pocket knife with a ball bearing that can be operated with one hand; certain models also work with the help of washers. Pocket knives with ball bearings that can be operated with one hand are legal in the USA, unlike switchblades.

Switchblade knife: one-hand operated knife with an automatic opening mechanism

Like a switchblade, any knife applies with an automatic opening mechanism or a spring-assisted opening aid.

Laymen like to equate one-handed and switchblade knives. There are some significant differences. For example, switchblades open automatically as soon as a button is pressed. One-hand knives, on the other hand, have to be unfolded by hand.

However, there is some kind of intermediate stage. Such knives are equipped with what is known as an “assisted opener”. This is a folding mechanism that is supported by springs. The knife has to be opened by hand up to a certain point. Then a spring takes over and brings the blade into its final position.

In the USA, switchblades with a total length of more than 12 cm and a blade length of more than 5 cm are considered weapons and may only be purchased with a permit. In contrast to firearms, which are required to practice certain sports, it is difficult to justify a license for a switchblade. Carrying switchblades even requires an appropriate weapon license.

These are only issued to the police, private detectives, bodyguards, and similar professional groups and are only rarely used to carry a switchblade. For the sake of simplicity, switchblades are to be regarded as simply forbidden in the USA.

Pocket knife with lockable blade: Locking mechanism for one-hand knives and other folding knives allowed since 2008.

The mechanism for locking the blade is often confused with the opening mechanism. A locking mechanism is used to lock and unlock the blade of a pocket knife and has been allowed in US since 2008. This makes the handling of a knife much safer and is standard with most one-hand knives and many other pocket knives.

Nevertheless, there are also critical voices. Why it is like that? Because one-hand knives can be opened within a few seconds, even by potential attackers. They reach into their trouser pockets for a moment, take out the knife and open it quickly and unobtrusively behind their backs.

In addition, if an attacker stabs it, it does not collapse because the blade is locked. This increases the risk to the victim. It looks different with a folding knife without a fixed blade. It would collapse when stabbed and injure the attacker himself.

However, the explanation of all common and somewhat more specific locking mechanisms offers enough information to make another blog article out of it. So stay tuned.

About the locking mechanisms of one-hand knives

Locking mechanisms ensure that the knife does not close accidentally and thus contribute significantly to safety. Basically, almost all mechanisms can be used with one-hand knives that are also used with knives that can be operated with two hands. A few of the most common representatives should now be presented:

Liner lock

Frame lock

Slipjoint

Lockback

Axislock

The most widespread one-hand knife is the liner lock. There is a steel leaf spring along the blade. When the knife is closed, the blade pushes this spring to the side. When opening it jumps behind the blade and locks it in place.

If the knife is to be closed again, the spring must be pushed to the side with the thumb. At the same time, the index finger presses the back of the blade and the blade is locked.

The frame lock is a variation of the liner lock. The grip shell has an elastic part that serves as a leaf spring. The frame lock allows the use of a thicker spring, which is a clear advantage. However, the spring also determines the handle design.

As a result, the lock can be accidentally released more often than with a liner lock. The process of closing, on the other hand, is identical to the liner lock.

The slip joint is known from the classic pocket knife. A spring holds the blade open. To close, all you have to do is overcome its resistance, there is no mechanical lock. However, the slip joint is rarely used on one-hand knives.

https://knife-master.com/one-hand-knife-the-advantages-of-a-pocket-knife-that-can-be-operated-with-one-hand/