10 Tips to Use an Engraving Tool Like a Pro

Posted by maria vidal on September 29th, 2021

1. Before you can start engraving, it is important to practice different words, fonts, and designs on a leftover piece of material. Practice will make your hands stable.
2. Once you are ready to engrave the actual product, you must ensure that the surface is clean and flat. Engraving on unclean surfaces can become a tough job.
3. Using a printed template for your design can be quite helpful at the beginning. Using a template minimizes any chances of mistakes and increases precision.
4. The material on which engraving is to be done should be fixed on the table. You must ensure that the object does not move from its place as it may affect the engraving.
5. Once you begin to engrave the product, the pressure applied on the tool must be constant to create an even engraving. The amount of pressure applied can vary according to the type of material.
6. While continuously engraving for a longer period, the user must avoid overheating the tool. It is important to take short breaks to cool down the tools.
7. During the engraving process, the user must try to experiment with the depths of the material. Engraving with variation in depths creates a 3D effect on the material.
8. One should always begin the outlines of the design that can be made using a template. The steps of filling and shading should be followed by this.
9. Engraving should only be done under proper lighting. Engraving in low light or dark can affect the final results of the product.
10. Once you are done with engraving, the engraved surface must be cleaned properly to remove minute dust particles. This will make the engraving look clean.