Easy way to set up NETGEAR Extender at home

Posted by james woods on November 28th, 2021

Though a wireless router comes with a powerful range to provide internet access all over the apartment or small home, it is not capable enough to fill a larger home with WiFi signals. This is due to the fact that most of the homes have dead zones which contain no or poor WiFi connectivity. The only solution to this problem is to install a WiFi Range Extender. NETGEAR Extenders are the most used devices when it comes to extending the existing WiFi range. However, some users find it quite difficult to set up a NETGEAR Extender on their own. Sensing this need, we have come up with this tutorial to help you on how to perform Netgear Extender Setup at home without any difficulty. Let’s get started. 

Complete Steps for New Extender Setup

NETGEAR WiFi Range Extenders are networking devices that take the incoming signals from home or office routers and then amplify them. Thus, they are vital devices to access the internet in every corner of the house or workplace. 

Before getting started with WiFi Range Extender Setup, you should be aware of your extender first. NETGEAR Extenders mainly has three panels: front panel, side panel, and bottom panel.

All LEDs are located on the front panel whereas the side panel contains buttons. And on the bottom panel, an Ethernet port and the Factory Reset button are present. 

There are 4 main LEDs:

1. Router Link LED

2. Device Link LED

3. Power LED 

4. WPS LED

How a NETGEAR WiFi Range Extender works

Talking in a layman’s language, NETGEAR WiFi Range Extender increases the distance of a wireless network. It makes a connection with the current network and then transmits its own WiFi signals. In case you are sitting far away from your home or office network or outside the range of the network, simply connect to the extender’s signals and enjoy high-speed internet. 

Now, you get to know how an extender works. Without taking your time, let’s get started with the NETGEAR Extender Manual Guide. Read on.

Mywifiext.net is the default web address for NETGEAR Extenders. It is like a login page that asks for a username and password. But sometimes, users aren\\\\\\\'t able to access the mywifiext.net setup page. This is because it is just a local web address rather than a regular internet website. To resolve this issue, make sure to contact experts on toll-free number 0-000-000-000. They will offer you instant and targeted solutions for accessing this web address without facing any difficulty. 

Different modes for Extender Setup

NETGEAR Extenders can be set up and installed in two modes namely Extender Mode and Access Point Mode. 

In the first mode, the extender will work as a normal extender i.e. it receives existing signals from the router and then boosts them to a great extent. On the other hand, the extender will work as a WiFi hotspot in the second mode. 

1. Set up NETGEAR Extender in Extender Mode

Here is the step-by-step guide to set up and configure a NETGEAR Extender as an extender:

• Set extender switch to the extender.

• Turn on the extender.

• Open any web browser.

• Enter mywifiext.net at the very top of the browser. 

• Type the network password and hit the Continue button.

• Once done with the settings, click on Finish.

That’s how one can set up NETGEAR WiFi Range Extender in extender mode. 

1. Set up NETGEAR Extender in Access Point Mode

Walkthrough the instructions below and configure the extender as an access point:

• Plug the extender into a wall socket.

• Move the extender switch to the access point.

• Go to mywifiext through a web browser.

• Enter username and password to proceed further.

• Netgear Genie Setup wizard will open.

• Follow the instructions given on-screen and click on the Next button.

• At last, complete the setup process by clicking on the Finish button. 

And there you are. The extender has been installed as an access point. If you still face any issues during the setup process, feel free to take help from industry experts.