Carbon Composites in The Application of the Transportation

Posted by whxinbocomposites on May 10th, 2016

Carbon composites materials tensile strength reached 3500 mpa, tensile modulus of elasticity

Carbon composites materials tensile strength reached 3500 mpa, tensile modulus of elasticity for 230 ~ 430 gpa, strength of 2000 mpa/(g/cm3), with high temperature resistance, resistance to breaks, and so on outstanding performance, to make it in the manufacture of the vehicle has been widely used. Here we mainly from two aspects of automobile and aircraft manufacturing to the application of carbon composites.

Carbon composites application in automotive manufacturing

Carbon composite materials due to the high light and stiffness, can be used to manufacture the car body and chassis, can reduce the weight of 40% ~ 60%. Carbon composites because of its environmental protection and wear resistance, can be used as a car brake pads, in F1 showed very good high temperature resistance and braking stability. Manufacturing hub not only reduced the weight of the carbon fibre material, can let a speeding car, and can reduce the maximum radial inertia force. Due to carbon composite material anisotropy, high strength and modulus are relatively low, use on the automobile transmission shaft, not only reduce the weight of the 60%, and has better fatigue resistance and durability. A lot of excellent characteristics of carbon composite materials are used in the automobile manufacturing, mainly has three advantages: lightweight, safety, fuel economy. Make carbon composite materials in automobile manufacture's advantage is obvious, also became the darling of the automobile manufacturing materials.

Carbon composites materials tensile strength reached 3500 mpa, tensile modulus of elasticity for 230 ~ 430 gpa, strength of 2000 mpa/(g/cm3), with high temperature resistance, resistance to breaks, and so on outstanding performance, to make it in the manufacture of the vehicle has been widely used. Here we mainly from two aspects of automobile and aircraft manufacturing to the application of carbon composites.


Carbon composites application in automotive manufacturing

Carbon composite materials due to the high light and stiffness, can be used to manufacture the car body and chassis, can reduce the weight of 40% ~ 60%. Carbon composites because of its environmental protection and wear resistance, can be used as a car brake pads, in F1 showed very good high temperature resistance and braking stability. Manufacturing hub not only reduced the weight of the carbon fibre material, can let a speeding car, and can reduce the maximum radial inertia force. Due to carbon composite material anisotropy, high strength and modulus are relatively low, use on the automobile transmission shaft, not only reduce the weight of the 60%, and has better fatigue resistance and durability. A lot of excellent characteristics of carbon composite materials are used in the automobile manufacturing, mainly has three advantages: lightweight, safety, fuel economy. Make carbon composite materials in automobile manufacture's advantage is obvious, also became the darling of the automobile manufacturing materials.

Carbon composites application in aircraft manufacturing

Carbon fiber resin matrix composites have excellent fracture toughness resistance, water resistance, aging resistance, flame retardant and anti fatigue performance, suitable for manufacturing main plane bearing components, such as the plane before the machine body, the vertical tail fin, wing wing, such as resistance plate, rectifying wall board member.Due to the fatigue resistance of carbon fiber composites, and applied on the blades of the helicopter. CFRP aircraft is one of the best materials, carbon/carbon composites (C/C) is the excellent manufacturing of aircraft brake material. In aircraft manufacturing, more and more proportion of carbon composite materials, the application of some large aircraft, the amount of carbon fiber and even reached more than 50%, carbon composite materials in aircraft manufacturing is the same.

Carbon fiber as a composite material of the 21st century, has gained widespread application, and the growing demand, in the future will greatly to replace a lot of materials, used in more fields. Wuxi via new material technology co., LTD., focusing on the carbon composite research and development, production and processing, to improve yourself constantly in advancing, the company mainly produces carbon fiber sheet, carbon fiber and carbon fiber structural function and other special-shaped pieces of production and processing, with China southern railway, Shanghai automotive industry corporation and other large auto companies have cooperation, in the future development will also be constant innovation and improvement of the carbon fiber on the road more walk more far.

for 230 ~ 430 gpa, strength of 2000 mpa/(g/cm3), with high temperature resistance, resistance to breaks, and so on outstanding performance, to make it in the manufacture of the vehicle has been widely used. Here we mainly from two aspects of automobile and aircraft manufacturing to the application of carbon composites.

Also See: Carbon Composites, Carbon Composite, Composite Materials, Carbon Fiber, Strength, Resistance, Materials
Link To Directory
Top Searches - Trending Searches - New Articles - Top Articles - Trending Articles - Featured Articles - Top Members

Copyright 2019 Uberant.com
516,613 total articles and counting.