Corrugated Plastic Tote Suppliers Introduces The Details Of The Use Of The Coate

Posted by yfcorrugatedhz on February 9th, 2022

This process can be used when the production batch is relatively large, film coating is not required, the printing effect is required to be good and the cost is low. The process is to first use a paper gravure printing machine to print thinner coated paper, and then compound this finely printed coated paper with ordinary slag board paper or boxboard paper, as a whole as a carton surface paper, and then carry out mounting and normal carton forming. processing. Corrugated Plastic Tote Suppliers describes the features of this process as:

(1) The production cost of the carton is low. The main reason for the cost reduction is that the whiteboard paper is changed to low-weight coated paper and the cheap boxboard paper is compounded, which reduces the material cost.

(2) Beautifully printed. The printing effect of paper gravure is very beautiful.

(3) Gravure plate making is more complicated and expensive, so it is not suitable for printing carton products that are frequently revised.

(4) The operation and control methods of the process such as paper compounding and box making in the printing factory should be carefully explored, accumulated and implemented reasonably, otherwise it will easily lead to an increase in the rejection rate.

Through the above introduction, Corrugated Plastic Agriculture Box Suppliers hopes that you can simply refer to the content of this article in future use.