How to Use Fibreglass Filler For automobile Body Repair (1)

Posted by zccyfiberglass on May 11th, 2016

How to Use Fibreglass Filler For Automobile Body Repair (1)

Any weld that's performed on a vehicle needs certain steps to assure a correct repair. as an example, weld-through-primer should be applied to the welded surface being welded; corrosion protection should be applied to the back side of the welded space, etc. in this article we tend to discuss why fibreglass is needed for automobile body repair.

What is fiberglass chopped strand mat?

Raw fibreglass are available in a soft cloth like material. While saturated with liquid resin and harder, it becomes hard and extremely strong. There are not too many fibreglass automobile components on modern-day cars, as they need all started using different composites like SMC and Carbon Fiber. However, fibreglass was on early model corvettes, truck hoods, and lots of different components. There are still aftermarket components that are factory-made from fibreglass and it still used for boats and jet skis.

Difference between fibreglass & fibreglass filler
Fiberglass filler comes in a can and is mixed with a cream hardener. It mixes lots like regular body filler, however it's thicker and a bit harder to combine. The filler really has fibreglass mixed in it. It comes short hair and long hair. This can be the length of the fibreglass that's mixed within the filler. both offer wonderful waterproof properties as they are doing not absorb water. Both fibreglass fillers are stronger than regular body filler. The long hair filler offers the most strength out of the 2. However, these fillers are terribly tough to sand. The filler is also thick, that makes it difficult to level and smooth like regular body filler.

Like it? Share it!


About the Author

Joined: September 11th, 2015
Articles Posted: 289

More by this author