A Guide to the Different Types of ACSR Conductors for Industrial Use
Posted by Vikaranta Marimuthu on July 12th, 2022
ACSR stands for Aluminum Conductor Steel Reinforced, and these conductors typically possess aluminum wire layers. Instead of aluminum, you can also find extensive use of steel-made wires. Galvanization gives protection to the wires from rust and other types of damage.
The quantity of steel and aluminum determines the strength of ACSR conductors. Today, you can observe an extensive industrial use of this conductor for its durability, flexibility, weight ratio, and affordability. In the following section, you can find a complete guide on the types and benefits of the ACSR conductors.
Definition of ACSR Conductors
Typically, the ACSR conductors are the high-capacity conductors that connect the overhead power lines. In most cases, you will find pure aluminum-made wires have been wrapped around the conductor. Instead of aluminum, you can find the use of galvanized steel. Steel has high strength, and thus it can render a better mechanical force.
The galvanized coating ensures that the steel cover of the ACSR conductors remains durable. Since such conductors connect the overhead cables, they are vulnerable to heat and rain. As a result, corrosion occurs quickly for the steel materials unless the galvanized coating is there.
Different Types of ACSR Conductors
You can find different types of ACSR conductors in the marketplace, and the use of a conductor depends on its type. For example, you may have heard about the ACSR moose conductor, which extensively uses the overhead cable laying process. In the following section, find details on different types of ACSR conductors.
1. All Aluminum Conductors
As the name suggests, these conductors feature aluminum coating outside. Since aluminum has lower conductivity than steel, you will find limited usefor these conductors. The conductors have extensive use in places where you cannot use thesteel-based conductors.
Aluminum is cheap and easily available, and thus such conductors are not costly. Moreover, aluminum does not need a heavy galvanized coating, as it can resist corrosion naturally.
2. Aluminum Conductor Aluminum Reinforce
In such conductors, you will find the use of aluminum alloy to render a better mechanical and electrical balance. Since aluminum alloy wires have been used, you will obtain durable performance from these conductors.
The only drawback is that aluminum alloy increases the overall price of the conductors. As a result, repairing or replacing these conductors becomes a costly matter. Nevertheless, availability is also an issue due to the limited use of these conductors.
3. All Aluminum Allow Conductors
As the name implies, such conductors feature all aluminum alloys instead of the mix of aluminum and its alloys. The cost of such conductors further increases due to the use of aluminum alloys. But, the good thing is that strength and performance of these conducts increase significantly.
4. Aluminum Conductors Steel Reinforced
Such conductors have aluminum wire coating, though steel wire coating is also there to improve the mechanical and electrical strength. The steel wire coating makes the conductors strong and durable. Such conductors typically have a higher diameter, and you can use creosote oil for maintenance. The cost of such conductors is higher than the types discussed above.
By searching online, you can find many leading manufacturers of ACSR conductors, and you can find ACSR rabbit conductor at an affordable price from this manufacturer.
