Different effective ways to generate a low lying fog machine by your pro equipme

Posted by John on June 13th, 2016

The good news is, there are a number of different effective ways to generate a low lying fog machine effect.

Utilize a Dry Ice "Pea Souper" Fog Machine. Basically, a pea souper is actually a container filled using heated water. When fog should be used, lots of dry its polar environment (20-40 pounds) is lowered in the water, usually inside a new metal basket. As the dry ice subliminates coming from a solid to gas inside hot water, it produces clouds involving cool carbon dioxide a couple of minutes. This gas is piped on the desired location with hair dryer hose. Pea soupers are incredible for creating thick minimal hanging fog since fractional co2 gas is heavier when compared with air, it stays low on the ground. Since the main consumable of an pea souper is dry ice but not fog juice, they quickly become additional expensive and difficult to work with than a normal fog machine. A popular model of Pea Souper is the LF05E manufactured by LeMaitre (pictured above) along with at nearly 0, will always be more expensive than global it should be. On the other hand, most rental houses you can keep them on hand when you need it for only a while.

If you decide a pea souper will be your best option for minimal hanging fog, here can be a few tips:

Look up industrial gas supply companies in the area to find the ideal prices on dry its polar environment. It's far cheaper to acquire it in bulk at their store than from the store.
If you break up the dry ice into smaller sized chunks, you will get additional fog output in a new shorter time than the use of larger chunks, but will likely get low lying fog occasion. An effective way There really is to break up dry out ice into smaller pieces should be to then use metal tongs to set it in a heavy cloth bag after which it hit it with a new hammer until you've reached the desired size.
You can safely keep large quantities of dry ice in a very normal insulated cooler a couple of days, but do NOT store dry ice in a very normal freezer. To your 110 degree below actually zero dry ice, putting it within a freezer almost 130 degrees hotter than it can be akin to putting a consistent ice cube inside a new hot oven. If one does this, your dry its polar environment will evaporate within a long time.
Be very careful the use of dry ice. At a new temperature of -110 °F, dry ice requires that you just take special safety measures during handling and hard drive. Always wear thick baseball gloves, eye protection and use metal tongs to address dry ice. Never touch dry ice using your bare skin, it will result in frostbite burns within seconds which enable it to leave lasting damage.

Currently, a few other solutions to achieve low hanging fog which has a normal fog machine.

Make a Fog Chiller to cool the fog coming from a normal fog machine. We've tried this numerous periods with mixed results, but sometimes it actually works pretty well. The idea is with dryer hose to duct the fog output through the fog machine into a chilled chamber to relieve the temperature of the fog so as to discourage it from soaring. This can easily be performed by cutting a hole inside side of a water resistant box (Styrofoam coolers are the best way to inexpensively try this) that may be filled with ice. A hole for the opposite side of the cooler might be connected to more hair dryer hose to pipe the fog nearer to where you want it into the future out. Tip: I like to employ those reusable sealed cooling packs as an alternative to ice because they stay frozen considerably longer than normal ice and make any mess after they thaw. I've also tried using hardly any dry ice (about 5 lbs) for you to cool the fog, which works pretty much. The downside to this technique is that fog output from a fog machine will always be reduced somewhat. Some in the fog will condense time for fog juice inside your cooler, so you need an attractive powerful fog machine to secure a decent amount of minimal hanging fog. This technique won't achieve a similar thick low hanging fog effect that this pea souper would develop, but it is the best way to get a similar look devoid of the mess and expense of a lot of dry ice.

Have a fog machine low lying with a new built-in cooling system. American DJ makes a new fog machine called Mister Kool that will takes the principle defined above and builds it in the same unit as your fog machine. You only fill the Mister Kool using 4 pounds of standard ol' ice and fog juice and out occurs reasonably low hanging fog. As before, this certainly won't replicate the pea souper influence exactly, but it could get fairly close. It also has an internal water drainage system to make doing away with the water from the melted ice no problem, something that's definitely significantly less easy with a home-built minimal lying fog solution. When you need thick ground-hugging fog, by using a Dry Ice based system will be the only reliable way for you to consistently achieve it. On the other hand, if you just want the fog from a fog machine to stay nearer to the ground, chilling in most cases an effective way to get that effect.

For getting more information about american dj low lying fog machine visit the website http://yourproequipment.com/lighting/fog-haze-dry-ice-machines.html