Walk-in or Reach-in Stability Chamber?Posted by labequipment on October 27th, 2022 So should I buy, walk-in or Reach-in Stability Chamber? Many drug suppliers ask this question. The names in the Stability Chamber will tell you the real difference, and sticking with things will prove to add detail. Let's think of it as pros and cons. XCH Biomedical Go Walk-in Stability Chamber Advantage Nearly endless sizes so can cover a lot of shelf space/examples A single certification covers a large number of rack areas Problems with Go walk-in Stability Chambers tend to be safer because of their larger size Shortcoming Defective chambers can cause problems with large numbers of samples They can be repaired. (XCH Biomedical provides crane lift support for some walk-in spaces) Installation often requires structural, electrical and cooling expertise Compressor takes up space or is remote and therefore charges Identification requires further investigation Spare parts may vary due to unique development They usually require level 3 strength and a further source of water Operator time indoors may be limited for conservation reasons Isolated spaces can be the desired footprint waste Realize Stability Chamber Advantage Provided with just one point Small footprints Can be moved quickly, like normal casters If one Stability Chamber fails, the sample can usually be capped from the other Stability Chamber Cold space service is less difficult, faster and more affordable due to a more compact cooling program Spare parts are generally in stock as they are "out of the box" or "collectible" items They can be single stage driven they have no island space No lighting required They are usually in stock and designed for critical transactions or hire Shortcoming Size is usually limited to 2000 liters Each system needs to be competent individually The issue is slightly less secure than the Go walk-in Stability Chamber, but still many times better than the ICH balance check limit. Summarize So while we'll see, you can spot the pros and cons between the two. Hope you find this information useful and it helps you choose the best option for you, Walk in or Reach in Stability Chamber. Needless to say, this may also depend on budget, space and long-term strategy, but if you would like to know more or have any questions, please do not hesitate to contact us Stability Test Chamber Manufacturer. Like it? Share it!More by this author |