How do I choose the right Glock custom kit for my needs?

Posted by CKS-Tactical on March 23rd, 2023

There are a few things to consider when choosing the right Glock custom kit for your needs. The first is what type of gun you have. If you have a full-size Glock, you will need a different kit than if you have a compact glock converter. The second is what type of modifications you want to make to your gun. Some kits are designed for specific modifications, while others are more general purpose. The third is your budget. Custom kits can range in price from a few hundred dollars to several thousand dollars, depending on the quality and features you want.

Once you have considered these factors, it is time to start shopping around. There are many places to find custom Glock kits, both online and offline. You can start by checking with your local gun store or searching online retailers such as CKS Tactical. There are also many specialty manufacturers that make custom Glock kits, such as ZEV Technologies and Agency Arms.

When looking at different kits, pay close attention to the included parts and instructions. Make sure that the kit you choose includes everything you need to complete the modification, and that the instructions are clear and easy to follow. Also, be sure to check the reviews of any kit you are considering before purchasing it. This will give you an idea of how well it works and whether or not other customers were satisfied with it.

How to Install A Glock Custom Kit

Most people are familiar with the Glock brand of handguns. They are reliable, accurate, and easy to maintain. Many people who own a Glock also like to customize their weapon with aftermarket parts and accessories. Customizing a Glock can be done relatively easily and does not require any special tools or skills. In this article, we will show you how to install a custom Glock kit.

The first thing you will need to do is remove the slide from the frame of your gun. This can be done by pulling back on the slide release and then pushing the slide forward off the frame. Once the slide is removed, take a look at the locking block assembly. You will need to remove the locking block pin in order to access the firing pin assembly. To do this, simply push out the locking block pin from left to right using a punch tool or small screwdriver.

With the locking block pin removed, you can now move on to removing the firing pin assembly. The firing pin assembly is located inside the breech face of the barrel and is held in place by two screws. Use a hex key or small screwdriver to remove these screws and then carefully remove the firing pin assembly from the barrel breech face.

Now that you have access to the internals of your gun, it's time to start installing your custom parts. If you are replacing your existing barrels with aftermarket barrels, begin by removing the old barrel from the slide. This is usually accomplished by removing a few screws from the rear of the slide. With the old barrel removed, you can now install your new custom barrel.

Once you have installed the new barrel, reinstall the locking block and firing pin assembly. Once these parts are securely in place, you can then reassemble your gun and test-fire it to make sure everything is working properly. Finally, finish off by installing any additional custom features such as sights or trigger kits.

Installing a custom Glock kit is relatively easy and straightforward. All you need is some basic tools and a bit of patience. As long as you follow these instructions, you should be able to successfully customize your Glock in no time!