Tips For Purchasing a Bottle Capping Machine

Posted by velocityequipmentpa on May 17th, 2023

The packaging industry needs several pieces of equipment to ensure perfection. The bottling plants do not only use fillers extensively but require a good quality capping machine to retain the liquid within the bottle without spillage. Sourcing the right bottle capping machine is, therefore, very important for all plants regardless of their size and requirements.

Making the final decision favoring a particular machine needs to be an informed one. Simply going with the flow and opting for a bottling capper that is the most popular or highly recommended would be foolhardy. It is vital to check the requirements properly and prepare a list before ticking off the features that match the machine. Some of the aspects to consider before spending money include the following:-

· Suited according to the cap- There are several types of caps used in the packaging industry. One must be aware of the type of cap that has to be placed tightly on the bottles as they pass down the line. Sure, the screw caps are commonly used by most bottling plants, but one should be careful about inquiring about a capping machine that can position other types of caps, namely the snap caps, corks, plugs, and/or ROPP caps. The end-user must also be concerned about the related cap-tightening equipment, such as chuck capping or spindle capping machines. The equipment that snaps the cap on the bottle must also enhance the production rate or efficiency of the process. Matching the machine to the specific types of caps used in the plant is the first responsibility when shopping for a capping machine.

· Range of Caps- Size does matter in the packaging industry. It is imperative to be knowledgeable about the varied sizes and shapes of bottles that the machine will cap. Most plant operators find the spindle capping machine an excellent choice when the varied-sized bottles need to be capped simultaneously. The changeover rate is superb for such devices. A chuck may be the right choice when there are numerous vials and tubes to contend with, though. Finding the perfect capper hat, can cap different types of caps, and handle a range of caps simultaneously will speed up the process and have the bottles ready for delivery as needed.

· Production Rate- Almost all bottling plants prefer to purchase fully automated machines today. This not only increases the speed of production but also eliminates human intervention, thus reducing recruitment costs substantially. The buyer should focus on the production rates that need to be achieved to ensure the cost-effectiveness of the product. It is interesting to note that facilities with low or medium production rates may do well with a semi-automatic bottling machine instead of investing in a fully automatic one.

Sourcing a high-quality elevator hopper that enables the operator to feed the caps directly into the feeder by raising them from a lower level is vital. Accidents at the plant can be reduced greatly, and efficiency increased courtesy of this device.