Scissor lifts for car service and service stations

Posted by SEO solutions on July 20th, 2023

Each car service or service station, at some point, needs to buy a car lift. Recently, it is the scissor lift that has become the equipment that is ordered only by open car services and long-existing service stations. A scissor lift is one of the most convenient types of equipment for a car service, which provides convenient lifting of cars to various heights; some models can move. Scissor lifts are used where high lifting capacities are required at relatively low lift heights. Let’s see why a Scissor Lift Platform is the best solution for a car service station and how to choose the one!

Device and principle of operation

According to the principle of operation, the Scissor Car Lift service does not differ from conventional lifts of this type or scissor lift tables. Scissor lifts are equipped with an electro-hydraulic drive, which allows lifting and lowering vehicles smoothly, without jerks, and almost silently.

Lifting occurs with the help of two hydraulic cylinders located parallel to each support. The hydraulic cylinders are driven by a small electric motor connected to the electrical distribution network.

In the event of an emergency power outage, breakage of hydraulic hoses, or arbitrary lowering of platforms, multi-level protection is provided - mechanical (and pneumatic - this requires a pneumatic line) blockers and "parachute" hydraulic valves. In the event of an accident, the vehicle is lowered manually.

 Some advantages of scissor lifts

The different benefits of a scissor lift include the following:

• High reliability and safety of work with the lift thanks to several simultaneously working safety systems
• Maximum space savings even in the smallest workshop space
• Convenient design, optimal height for work
• Ability to service cars with different wheelbases
• Use in active acceptance lines and posts for wheel alignment adjustment

In addition, without exception, all scissor lifts for service stations and car services are equipped with "parachute" valves, which prevent the rapid leakage of oil from the system in the event of a hydraulic system failure.

Blocking valves are automatically activated when there is a sudden loss of pressure due to a punctured hose or a damaged gasket. In the raised position, the lift can be blocked mechanically by a special lever. This not only increases safety during operation but also saves on electricity. Special valves block the flow of fluid from the cylinders if the hydraulic scissor lifts for the garage and the car service stops receiving electricity.

Buying a scissor lift- what to consider?

The main characteristics of the Scissor Lift Trolleys for car service and service stations are as follows:

• Load capacity: 2.6-4 tons. Most models are focused on lifting cars to 3 tons.
• Lifting height from floor level: 960-2160 mm. Most units are designed for a height of 1800 mm.
• Clearance: 98-260 mm (when installed on the floor or ground). Several car lifts are designed for installation with a deepening, in which the clearance is zero.
• Weight: 480-2400 kg. However, the weight of most models (including those with a load capacity of up to 3.5 tons) is up to 800 kg.

When buying a scissor lift, preference should be given only to trusted suppliers that have partnerships with a manufacturer of equipment for service car workshops.

For more information please visit: Scissor Car Lift