Hydraulic parent line processing machine work demonstration

Posted by bruce zhu on March 15th, 2024

 (how much is the price of Henan copper row bus bending machine)

The material blocking agency is also an indispensable part of the CNC busbar machine. The motor transmission is used to drive the two rods to move synchronously through the chain, and the CNC system controls the block size. The last part is the workbench, which is manipulated by the button box, so that the motor of the bending machine drives the front and back of the material, and the distance between the CNC system is controlled.

There are basically several types of hydraulic parent line processing machines to demonstrate the type of cylinder: basic type (square, rectangular, cylindrical), rodless cylinder, band -oriented cylinder, swing cylinder, and gas claw.

No matter how good the quality is, you can spoil it. It cannot be used for a long time. The fully automatic bus machine itself is more precise. It is required that the user needs to regulate it to operate it. It, do you think it is Nokia? Intersection Intersection Intersection

The correct loading and unloading mold and the plastic line machine can only work normally when the winding mold is used correctly. The correct loading and unloading mold plays a key role in the molding of the coil. The tail frame of the device is removed. Finally, the shift device is used to remove the coil. When installing, you should pay attention to install the mold on the fixed device of the bus, adjust the thimble rear frame to hold it up to the wound core rod, and finally lock it in the lock. Tight; During the winding process, the coil must not be loosened and the device should be stopped. Only by handling it, it can better play the efficiency of the equipment.

Methods that improve processing measures for processing accuracy and improve processing accuracy can be roughly summarized as the following: reduce the original error method, compensate the original error method, the transfer of the original error method, the equalization of the original error method, and the original error method. Hydraulic bus processing machine work demonstration

The bus machine is generally composed of three industrial stations: punching, bending, and cutting. The hydraulic driver is used to control the control of each process by PLC. The electrical industry is highly efficient small machine tools. As one of the three main stations, the function of cutting and cutting at the buser of 20 to 140mm and 3-15mm thick is cut off and the incision is smooth and vertical of the section. The key points and difficulties.

The key part of the working demonstration grating detection device of the hydraulic bus processing machine is the number of sculptures. It consists of light sources, clustering lens, indicating grating, photoelectric components, and adjustment mechanisms. There are many forms of grating reading header. According to the characteristics of the read numbers and the occasions of use, it is divided into direct receiving read -type readable heads (or silicon light battery reading head, mirror -type reading head, spaghetti -type reading head, metal grating reflective reading head).

Due to the different functional requirements of various coil products, the types of parent wire machines are also diversified. At present, the most common pawnene -produced by the power bus processing machine is full -automatic buser, circular bus, semi -automatic bus machine, servo precision parent line machine , Transformer parent line machine and other models.