Fully automatic copper row bending machine instruction manual (Guidance of Guizhou hydraulic bus punching machine)

Posted by bruce zhu on March 17th, 2024

Fully automatic copper row bending machine instruction manual (Guidance of Guizhou hydraulic bus punching machine)

Economic bus processing machine: Different thicknesses of the parent line bend, control the itinerary distance by adjusting the induction switch of the working oil cylinder, and the working pointer can complete the corresponding bending angle for different ruler scale.

The analysis process of fully automatic copper row bending machine instructions CNC bus electrical failure is also the process of failure of the failure. Therefore, some commonly used exclusion methods of the bus electrical failure. Below it will be taken by the editor:

DC motor speed regulation method: DC motors need to convert the supply of power supply into DC power to drive the motor to run, so DC motors are equipped with DC -speed regulating boards or brushless drives The application amount in the device is large.

The dynamic characteristics of machine tools have deteriorated, the quality of workpiece processing decreases, and even the machine tools are vibrated at a certain speed. One of the larger one may be caused by too much gap between the mechanical transmission system or even severe wear or even sufficient wear or even wear; for electrical electricity; for electrical power In terms of control system, the speed ring, position ring and related parameters are no longer in the best matching state. The optimization adjustment should be re -adjusted after the mechanical failure is basically eliminated.

The minimum vertical bending angle of the 303SK series of CNC bus is 90 ° C, and its shape size is 1500 × 1300 × 1200mm. Accuracy ± 0.3 ° instruction manual

The grating ruler, also known as the grating ruler shift sensor (grating ruler sensor), is a measuring feedback device working using the optical principle of the grating. The grating ruler is often used in the closed -loop servo system of CNC busbar machine tools, which can be used as a detection of linear displacement or corner displacement. Its measured and output signal is a digital pulse, which has the characteristics of large detection range, high detection accuracy, and fast response speed. For example, in CNC machine tools, it is often used to detect the coordinates of tools and workpieces to observe and track the error of the knife to play a role in compensating the movement error of a tool.

The instruction manual of fully automatic copper row bending machine often checks whether the three -phase current of the motor motor of the bus is balanced. The three -phase induction motor, the difference between the three -phase current, the uniform value of the current and the other two -phase current is not allowed to exceed 10 %, so that the ability to ensure the safe operation of the motor. If it exceeds that the motor is faulty, it should be checked that it should be clearly removed after the failure.

The bus processing machine of the parent line machine factory store is mainly suitable for high and low voltage switching cabinets and transformer manufacturing industries, which are used to process various specifications of copper and aluminum bus. As long as the user is on the corresponding processing unit, it can separate the rushing, cutting, and discount processing of the parent line, and the production efficiency is high.