Handy tips for your Kerbed Alloys Chelsea

Posted by abigaylemark on August 27th, 2016

The earliest alloy wheels were made out of magnesium. They did not gain much popularity due to the reason that magnesium has low ductility. However, they paved the way for the industry that is now involved in manufacturing alloy wheels. As a result, alloy wheels have become a sensation in a very short span of time. Nowadays, if you are a resident of London and want to either paint or polish alloy wheels then contacting a team of experts for alloy wheel refurbishment London is a very good option.

The process of alloy wheel repair is very simple and it is easy to understand. First of all, wheels are brought to an expert team. Or if the client has any problem, the team can collect the wheels at his wish. The tyres are then removed by using a machine that is called tyre remover. This machine ensures that the alloys are not damaged before the process of repairing them begins. This cautiousness is one of the main reasons why many local vehicle owners are dependent on the process of alloy wheel repair London without keeping a doubt in their minds.

These tyres are then carefully marked so that they could be easily identified after the whole process of wheel refurbishment completes. They are also marked to ensure that they do not mix up with each other. This marking task also allows the team to keep a record of different alloy wheels that have been repaired by them. It depends on the condition of the alloy wheels to decide whether they will be dipped in paint stripper or the team will use a sand blaster machine. Using the sand blaster machine is a far better option because it is a much quicker way than the most traditional ones.

The special and unique sand blaster machine is effective for the purpose of alloy wheel refurbishment London. It allows the team to easily prepare the alloy wheels for cleaning. As a result, it gives a good surface result. After preparing the alloy wheels for being repaired, they are placed for precision cutting. This is important for pin pointing all the exact locations where the damages have been done. After gathering all the data precisely, the process of diamond cutting is initiated. This diamond cutting process cuts microns off every layer of the alloy wheels.

Alloy wheel repair London is done by using highly equipped machines. Alloy wheels are made to spin using various machines during the cutting process. A rotatory cylinder is used to spin them. A sharp and precise blade is located at the end of the machine. The blade has a very sharp electric mechanism that allows the machine to slide in and out very smoothly. This way, it ensures that the alloy wheels are not damaged in any way due to the tip’s fast cutting speed.

These alloy wheels are then cooled down and painted. The cooling process takes around 20 minutes. They are also passed through a quality control process to check their standards. This is how alloy wheel repairis done in London.

 Using the services of a good team available for alloy wheel repair London or alloy wheel refurbishment London is a good option for the local vehicle owners.