WiFi camera surveillance with their own hands

Posted by Lemons Alicia on September 5th, 2016

Over time, progress makes video surveillance more accessible for the common man who wants his own hands to install video surveillance in the building, the apartment ... yes anywhere. In this article I would like to tell you about one great mini wifi TV camera that is easy to install and configure, and which allows to obtain very high quality video picture with sound through the Internet on your phone or tablet.
The best camcorder has a nice design, the lid has a special opening, if necessary, you can hang it on the wall or ceiling, has a miniature size, 7.6 cm x 6.4 cm. Comes complete with power supply. The camera is wireless, ie transmits a video image via wifi, but it is necessary to take into account that still have to connect it with the power supply unit to the mains. Therefore, when choosing the place of installation the camera is necessary to pay special attention to where the outlet is available nearby.
What is it wireless? "- I ask you a question. Yes, now all video devices are still very energy intensive, and batteries, which would provide power wifi surveillance camera for a week, or at least for a few days had not been invented at least the same size as the cheap wifi camera itself. You can buy a large battery (which will weigh 10 kilograms), but away from it all still have to hold the power cable to the camera. So take it as inevitable - the camera will have to be connected to the outlet 220, but it is not necessary to drag dopolgitelno cable to your Internet.
So, the first thing we need to do surveillance with their own hands and get access to video from anywhere in the world - is the internet. Second - you should be in the room where you are going to install a camera, wifi router that is connected to the Internet. Next, let into the following sections: 1. Download from Google Play or the Apple store iSmartVievPro program and install it on your phone or tablet. 2. Take wifi ip LuckyStar camera and connect it to the power supply. 3. Wait for the camera to boot when this happens, a blue LED starts blinking periodically. Now you have 5 minutes to set up the camera. If you have missed in 5 minutes and the LED goes out, turn off the power supply and repeat step 2. 4. Open the program iSmartVievPro and click on the button "Add camera" (see. Picture below).