History Of Wilton Vises

Posted by Tool Man on November 7th, 2016

Every professional woodworker knows about Wilton vises and you will be hard pressed to find someone who doesn’t. They are notorious for high quality build and go amazingly well with JET band saw. With all the bells and whistles of modern woodworking, carpenters find themselves returning to a basic tool we know as vise and Wilton has been nothing short of undisputable king in that sector. The legend of Wilton started in early 1940s when Hugh W. Vogl, a Czech worker, established the vise fabricating organization naming it after the cross road where the first organization building was found: Wilton Avenue and Wrightwood Avenue in Chicago.

He put together a 4" vise with a one of a kind licensed shot plan referred to at the time as the 40S Machinist Vise. The fine strung shaft precisely fit in a flat tied down, unbreakable pliable nut. This made an even, focal draw, which disposed of dead movement and unnatural strain on the nut. The string on this vise was totally encased keeping it clean from pollutes and very much greased up for a considerable length of time of smooth operation. The steel enter incorporated with the base of the principle body manages the portable jaw in a decisively introduced keyway which is impeccably machined taking out wear and averting side contort paying little heed to weight applied.

In the mid 1950s Wilton extended its product offering to incorporate clamps. Hugh Vogl, together with his child Alex set out to manufacture a strong distribution channel. In 1950, more than five hundred entry level carriage clamps and 900 professional grade clamps were added to the line. These clamps were tried to convey the most extreme conceivable quality for each once of weight with a body made of refined pliant castings with elasticity extending as high as 80,000 pounds psi. With axles machined from amazing frosty moved steel stock and fitted with liberally proportioned handles all sizes were furnished with current exactness cut top strings. Wilton Tool Manufacturing remained at the Chicago area until 1957 when they transitioned to the rural Schiller Park, Illinois. The vises were thrown with either the Chicago or Schiller Park areas which is one approach to best decide generation date and area of the vise stamped with month and year on the keyway.

Wilton presented the Pow-R-Arm line in the 1950s. In the late 1950's, Wilton included the POW-R-ARM work positioners to their product offering. This was a present day technique to position seat work and accelerate mechanical production systems. The Wilton Pow-R-Arm held the get together or work piece allowing the administrator to have both hands free helping the administrator to work speedier as well as with more prominent precision and without effort. The work positioners were accessible in either mechanical or water driven forms in different sizes and with a few adornment connections for a wide range of assembling operations. In the 1960, Wilton moved forward with the development endeavors including pressure driven clips and processing machine vises.

In 1970's Wilton had found the retail advertise required a quality vise line and opened an extra assembling office in Winchester, TN for creation of littler less costly vise to address the issues of the hobbyists and DIY enthusiasts. All the while in the Winchester office, Wilton started fabricating a metalworking apparatus line. The principal items in this class were bore presses and bandsaws. In the push to proceed with the takeover of the retail vise advertise, Wilton gained the Warren Tool Group in late 1990's. With offices now in three states the nation over, Wilton had figured out how to corner the whole vise showcase. The Columbian Vise, produced in Cleveland, OH was the other "Made In USA" vise and was incorporated into the Warren Tool Company merger.

In 2002, the Wilton Tool Company and its late merger organization, Warren Tool were acquired by Walter Meier Holding Company AG. The assembling of the Wilton mechanical vises was moved from Schiller Park to Carpentersville IL where they are still fabricated today. Wilton mark items were brought into a group of value brands as of late gained by WMH Tool Group. Those brands included JET Woodworking and Metalworking and Powermatic Woodworking which turned into another place of brands.

In 2014, Tenex Capital Management New York City, NY obtained the Jet, Powermatic and Wilton brands from Walter Meier and changed the organization name to JPW Industries where they proceed to develop and beat their opposition with creative, quality items and administrations. All through every one of the progressions, more than 73 years, the first shot vise planned in 1941 by Hugh Vogl is still the biggest offering modern vise in the commercial center.

ToolOrbit.com offers you to buy Jet band saws, Powermatic drill presses and Wilton vises on lowest online prices.